American Restoration & Mold Specialist

American Restoration & Mold Specialist American Restoration & Mold Specialists Inc. is a leader in the Remediation and Restoration
industry

The one-word answer is water. There are actually five factors that are needed to support fungal growth, but water is th...
09/09/2021

The one-word answer is water. There are actually five factors that are needed to support fungal growth, but water is the factor most easily controlled indoors and is the one factor every species of mold requires. The other factors are temperature, light, nutrients (food source), and PH (mold prefers a slightly acidic environment). Mold thrives under humid conditions and in dark areas. Water leaks from leaking water pipelines, roof leaks, AC leaks, and other sources of water discharge often contribute to the growth and spread of mold, which may be considered as mold infestation.

https://www.arms3fl.com/

The reason you should not attempt to remove mold on your own is that you do not know what type of mold that you have and...
09/08/2021

The reason you should not attempt to remove mold on your own is that you do not know what type of mold that you have and you may not be using the correct chemicals to remove it.
By using the incorrect chemicals you may activate the mold to spread more. Mold is a bacterial growth that spreads within 24-48 hours, it is not recommended to breathe or touch the mold without using proper equipment. Mold causes allergic reactions such as a runny nose, sneezing chest congestion, and rashes. It can trigger asthma attacks, respiratory infections, and many other severe illnesses. If you have kids elderly or any family with any underlying conditions such as asthma and/ or allergies mold can cause those conditions that worsen.

Call American Restoration and Mold Specialists at 754-399-9883 and we can schedule a free inspection to make sure your home is free of mold. It is crucial to get rid of the mold as soon as you know you have it.

https://www.arms3fl.com/

Antifungal and antimicrobial substances are used to clean the existing colonies of mold. This method of cleaning mold wi...
08/30/2021

Antifungal and antimicrobial substances are used to clean the existing colonies of mold. This method of cleaning mold will help prevent more mold from forming. The method of clean-up depends on where the fungi are growing. Non-porous and hard locations such as a bathtub or sink can be cleaned well by wiping and then adding a safe, approved biocide. Mold can travel into porous locations such as wood floors and walls. There may be a larger problem within these places. Once every infected porous area is inspected, the ones with deeper mold growths will have to be removed and replaced.

https://www.arms3fl.com/

Your house must be sanitized once the remediation is finished. Clothes, furniture, curtains, and similar items will be c...
08/27/2021

Your house must be sanitized once the remediation is finished. Clothes, furniture, curtains, and similar items will be cleaned. Fogging equipment is used to deodorize both your belongings and the air.

https://www.arms3fl.com/

High-efficiency air filters are put into the home’s HVAC unit to clear the entire house of active spores. This will help...
08/26/2021

High-efficiency air filters are put into the home’s HVAC unit to clear the entire house of active spores. This will help prevent the spores from remaining and turning into fungi. Depending on contamination levels, experts may also use special HEPA-filtered vacuums to pick up any spores that could have settled onto a surface.

https://www.arms3fl.com/

All of the areas that have mold are sealed off. The mold is contained to help prevent its spread into other areas of the...
08/25/2021

All of the areas that have mold are sealed off. The mold is contained to help prevent its spread into other areas of the property. There are various ways to contain mold. Some containment areas may have physical barriers with negative air chambers and negative air pressure.

https://www.arms3fl.com/

The first step of remediation is mold inspection. Your home will be searched thoroughly for visible signs of mold. Exper...
08/24/2021

The first step of remediation is mold inspection. Your home will be searched thoroughly for visible signs of mold. Experts will also take air samples to figure out what type of mold it is.

https://www.arms3fl.com/

There are three main levels of mold which fall under 🧼 Allergenic Mold🧼 Pathogenic Mold🧼 Toxic Mold Toxic Mold is the mo...
08/23/2021

There are three main levels of mold which fall under

🧼 Allergenic Mold
🧼 Pathogenic Mold
🧼 Toxic Mold

Toxic Mold is the most severe. It is also known as Stachybotrys or Black Mold. Black Mold is far more dangerous to human beings and can lead to complications that can lead to many different illnesses. Black Mold releases a chemical called mycotoxins into the air that causes many different health problems.
Our company will send a Licensed Mold Assessor to take samples of the mold and have it tested in a laboratory to determine if you need mold remediation.
Once the results come in we can then proceed with the protocol of remediating the mold. No matter what category of mold you have, they’re all equally dangerous and need to be removed from your home or business for health and safety reasons. Once the mold is removed from your home the mold assessor will come back and retest the affected areas to ensure the work was done accordingly and your property is mold-free.
We are here to help you. Please give us a call at 754-399-9883.

https://www.arms3fl.com/

Bleach does not kill moldMany people use bleach to get rid of mold in their homes. The truth is that bleach kills live m...
08/20/2021

Bleach does not kill mold

Many people use bleach to get rid of mold in their homes. The truth is that bleach kills live mold, but not mold spores. What’s more, removing mold with bleach and water can make mold regrow even faster.

https://www.arms3fl.com/

The most common causes of mold growing on walls are high humidity, condensation, and water leaks (which are often hidden...
08/19/2021

The most common causes of mold growing on walls are high humidity, condensation, and water leaks (which are often hidden inside the wall). Condensation forms when water v***r in the air meets cold surfaces and cools to become liquid. ... Leaking pipes near or inside of walls are a common cause of mold.

https://www.arms3fl.com/

The answer to this question is yes of course. If you have filed a claim and you have been underpaid or denied for the da...
08/18/2021

The answer to this question is yes of course. If you have filed a claim and you have been underpaid or denied for the damages, you can give us a call and we can assist you. If you need more money to remove the mold and to get the insurance company to pay you to fix all the damages within your home, you can call us and we can help you through the process. Our company can help direct you to the proper steps in helping you reopen your claim. Please give us a call at 754-399-9883.

https://www.arms3fl.com/

Molds are very common in buildings and homes. Mold will grow in places with a lot of moisture, such as around leaks in r...
08/17/2021

Molds are very common in buildings and homes. Mold will grow in places with a lot of moisture, such as around leaks in roofs, windows, or pipes, or where there has been flooding. Mold grows well on paper products, cardboard, ceiling tiles, and wood products. Mold can also grow in dust, paints, wallpaper, insulation, drywall, carpet, fabric, and upholstery.

https://www.arms3fl.com/

Address

Pompano Beach, FL
33064

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

(754) 399-9883

Website

Alerts

Be the first to know and let us send you an email when American Restoration & Mold Specialist posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to American Restoration & Mold Specialist:

Shortcuts

Share

Category