Rock Solid Solutions, LLC

Rock Solid Solutions, LLC Oilfield Supplies & Hardware
Oilfield Safety Anchors
Subsurface Pump Repair
Suction & Hydraulic Hose

Oilfield Supplies - Oilfield Safety Anchors - Subsurface Pump Repair - Suction & Hydraulic Hose - Fishing Equipment - Plythal Technical Hunting Gear

๐๐”๐Œ๐ ๐ƒ๐„๐’๐‚๐‘๐ˆ๐๐“๐ˆ๐Ž๐: 20-150-RWBC-20-420 - 2โ€ Hold-Down (F/ 2-3/8โ€ tubing) 150 - 1-1/2โ€ BarrelR...
03/27/2026

๐๐”๐Œ๐ ๐ƒ๐„๐’๐‚๐‘๐ˆ๐๐“๐ˆ๐Ž๐: 20-150-RWBC-20-4

20 - 2โ€ Hold-Down (F/ 2-3/8โ€ tubing)
150 - 1-1/2โ€ Barrel
R - Rod Pump
W - Thin Wall Barrel
B - Bottom Hold-Down
C - Cup Type Seating Assembly

I call these pumps, ๐Žโ€™๐ฅ๐ž ๐“๐ซ๐ข๐ž๐ & ๐“๐ซ๐ฎ๐ž. They have been built this way since forever. They get the job done nearly all the time and the patch is full of them! This one does have a material upgrade! Brass Nickel Carbide Barrel, trimmed out in Stainless Steel & A Monel Pin Grooved Precision Spray Plunger! Sheโ€™s blinging! ๐Ÿ˜

This Pump weโ€™ll be going to its new home the first of next week!

03/09/2026

THBC Tubing Pump

IN โ€œLAYMANโ€™S TERMSโ€!

The Working Barrel is essentially used as a section of the tubing, allowing them to move more fluid than your standard insert pump. The hold-down is a separate part, sometimes installed in the seating shoe before delivery, and the traveling assembly attaches to the sucker rods with a mechanism to retrieve the hold-down if the valves need repair!

๐Ÿ˜ƒ

๐Ÿฎ-๐Ÿญ/๐Ÿฎโ€ ๐˜… ๐Ÿญ-๐Ÿญ/๐Ÿฎโ€ ๐˜… ๐Ÿฏ๐Ÿฌโ€™ ๐—œ๐—ป๐˜€๐—ฒ๐—ฟ๐˜ ๐—ฃ๐˜‚๐—บ๐—ฝThis Pump was in overall decent shape considering its run time and the corrosive enviro...
03/04/2026

๐Ÿฎ-๐Ÿญ/๐Ÿฎโ€ ๐˜… ๐Ÿญ-๐Ÿญ/๐Ÿฎโ€ ๐˜… ๐Ÿฏ๐Ÿฌโ€™ ๐—œ๐—ป๐˜€๐—ฒ๐—ฟ๐˜ ๐—ฃ๐˜‚๐—บ๐—ฝ

This Pump was in overall decent shape considering its run time and the corrosive environment that it was in! Aside from a severely corroded valve rod, pitted ball & seat, a beat out cage, tagged clutches and a mountain of iron sulfide, it held up to the conditions pretty well! Where the owner did themselves a real favor was investing in a better Barrel!

The Brass Ni-Carb Barrel is definitely the Cadillac of barrels as far as most of us are concerned. Itโ€™s For sure worth the extra cost & goes Along way in eliminating pump failureโ€™s due to Well conditions!

๐๐ซ๐š๐ฌ๐ฌ ๐๐ข-๐‚๐š๐ซ๐›:
Hard nickel coating that protects against rust and corrosion, and silicon carbide particles that help it resist wear and abrasion. These materials are applied inside a smooth brass tube, creating a strong, long-lasting surface that reduces friction and holds up in harsh conditions.

03/03/2026

API threads are ever so important and in many cases required. Reasons such as as:

Structural Integrity, Sealing Performance, Application Specific Design and one of the most important reasonโ€ฆ Standardization!

As you can see here, we are still running them โ€œanalog threadersโ€ ๐Ÿ˜‚! They get the job done though!

RIDGID Tools RIDGID Power Tools

02/26/2026

I like to call it, โ€œThe Sludge Judgeโ€.

2โ€ X 16โ€™ with 60 Ring PA Plunger

(Pictures in the Comments)

The P.A. (Pressure Actuated) plunger is built for harsh, abrasive wells. It has 20, 40, or 60 ring grooves and a loose (-005) fit so larger debris can pass without damaging the pump. The rings help lift fluid, sand, and scale as well as other solids. On the up stroke they expand to wipe the barrel clean. This improves pumping efficiency and makes the plunger ideal for corrosive, abrasive, and high temperature wells.

02/25/2026

Sometimes they come in 2โ€™s!

With just a few differences, I like this one just slightly better than the last! This pump has a bottom discharge valve between the Standing Valve & the Barrel!

The valve redirects a percentage of the pumped fluid to flow around the outside of the pump, between the pump and the tubing wall. This keeps fresh fluid moving past the bottom of the pump, which helps prevent dirt and debris from building up and sticking the pump. It also reduces damage caused by corrosive fluids on the outside of the pump. Stagnant fluid ainโ€™t good for nobody!

02/25/2026

I call it the, โ€œPetro Noodle 5000โ€!

1-1/2โ€ x 28โ€™ Crude Maker! Yummy! ๐Ÿ˜‹

02/22/2026

Come with me to location to pick up
A Tubing Pump for repair!

02/12/2026

Sheโ€™ll Stroke, Boys! 195 inches to be exact! 2โ€ Bore Oil Guzzler! Sheโ€™s shiny too!

Weโ€™ve gotโ€™m going North, South, East & West Today! ๐Ÿ’ช๐Ÿผ

And then there was one!Weโ€™ve gone through our stock of Heat lamps. Ive got one left! We do have a couple cases of Clear ...
01/23/2026

And then there was one!

Weโ€™ve gone through our stock of Heat lamps. Ive got one left! We do have a couple cases of Clear Heat Lamp Bulbs & a few rolls of insulation on the shelf. Iโ€™ve got plenty of heat tape at the moment. 3ft, 6ft, 9ft & 12ft! Getโ€™m while you can!

๐Ÿšจ RESTOCK ๐Ÿšจ We are stocked up on our rags again. 10lb Bag - Colored Knit Wiper White Flannel ...
01/22/2026

๐Ÿšจ RESTOCK ๐Ÿšจ

We are stocked up on our rags again.

10lb Bag - Colored Knit Wiper
White Flannel
Bar Mop Towel
Blue Huck Towel

50lb Bag - Blue Huck Towel

Nothing like a 2โ€ x 26โ€™ Behemoth in the morning. Guaranteed grease maker!
01/22/2026

Nothing like a 2โ€ x 26โ€™ Behemoth in the morning. Guaranteed grease maker!

Address

604 E Main Street
Post, TX
79356

Opening Hours

Monday 6:30am - 5:30pm
Tuesday 6:30am - 5:30pm
Wednesday 6:30am - 5:30pm
Thursday 6:30am - 5:30pm
Friday 6:30am - 5:30pm
Saturday 7am - 12pm

Website

Alerts

Be the first to know and let us send you an email when Rock Solid Solutions, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rock Solid Solutions, LLC:

Shortcuts

Share

Category