Chris Webb Fine Woodworking

Chris Webb Fine Woodworking Chris Webb Fine Woodworking's mission is to provide the very best in craftmanship and materials to produce nothing less than finest wood products.

Chris Webb Fine Woodworking is owned by, myself. I have worked 30+years as a carpenter. Over the years I have been blessed with the opportunity to work for and with very talented woodworkers. A variety of very competent home builders.And through these opportunities have acquired a large body of knowledge and experience to apply to my craft. And It doesn't hurt that I love my job.

New Shirts!
03/22/2026

New Shirts!

After a little over a year from the start. All the pieces have finally come together. Almost, but close enough.
02/16/2026

After a little over a year from the start. All the pieces have finally come together. Almost, but close enough.

Fancy Double Doors
01/09/2026

Fancy Double Doors

Here’s 1 of 3 panels I made. Incorporating the window casing into the build. The young man who sent me pic. Installed th...
11/07/2025

Here’s 1 of 3 panels I made. Incorporating the window casing into the build. The young man who sent me pic. Installed them. I forgot to get pictures when I was building them. Had my head down plowing away. I’ll get some better pics next time I visit the site.

Because I had to make these parts in an unorthodox way. They weren’t completely consistent part to part. Pretty close. B...
08/07/2025

Because I had to make these parts in an unorthodox way. They weren’t completely consistent part to part. Pretty close. But not quite. A couple of hours of sanding. A knife and file here or there. And we can make a hot mess into something worthwhile.

Making some progress.
08/07/2025

Making some progress.

Ever since I’ve had these legs. I’ve had concerns about how to tie in the aprons. This is what I came up with. Thoughts?
05/07/2025

Ever since I’ve had these legs. I’ve had concerns about how to tie in the aprons. This is what I came up with. Thoughts?

I glued up all those pieces I made. And gave them a good sanding.
05/05/2025

I glued up all those pieces I made. And gave them a good sanding.

Any one whose tried to router against the grain. Knows how shoddy and dangerous the results are. So what do you do? Two ...
05/01/2025

Any one whose tried to router against the grain. Knows how shoddy and dangerous the results are. So what do you do? Two routers. One with a bottom bearing. And one with a top bearing. This way you always have tool pathing with the grain. Just flip your piece to match the bearing position. And grain direction.

I need some Queen Ann legs for a French styled armoire that I’m building. Getting them at the height needed was cost pro...
04/25/2025

I need some Queen Ann legs for a French styled armoire that I’m building. Getting them at the height needed was cost prohibitive. And had to come from China. A whole other problem right now. Was able to get some 32” ones made in the US. And boy were they a big steaming pile. But some times you gotta do what you gotta do. So I put them in my board stretcher. And cleaned them up a bit.

To make a bigger part.
04/02/2025

To make a bigger part.

I made a bunch of parts.
04/02/2025

I made a bunch of parts.

Address

Prosperity, SC
29127

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Chris Webb Fine Woodworking posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Chris Webb Fine Woodworking:

Shortcuts

Share

Category