Patrick Custom Sawing

Patrick Custom Sawing Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Patrick Custom Sawing, Ramer, TN.

Walnut…..we have several logs to saw!Call or text Jordan Woodruff at 662-594-5274. Some logs old enough for spalting too...
02/15/2025

Walnut…..we have several logs to saw!
Call or text Jordan Woodruff at 662-594-5274. Some logs old enough for spalting too.

We’re still making log siding on a regular basis, made from a 12ft 2x8 pine, 6.75 square foot per piece. Prices vary fro...
02/15/2025

We’re still making log siding on a regular basis, made from a 12ft 2x8 pine, 6.75 square foot per piece. Prices vary from time to time depending on the cost of the 2x8 but today’s price is $17 per piece. Thanks. Prefer call or text Jordan Woodruff at 662-594-5274.

We’re sawing some cedar , already have some 6x6’s but have logs to cut different sizes up to 8x8’s or boards of any type...
02/15/2025

We’re sawing some cedar , already have some 6x6’s but have logs to cut different sizes up to 8x8’s or boards of any type and slabs for bar tops or unique slabs.
Call or text please to Jordan Woodruff 662-594-5274. Thanks
No messenger please.

Start training a couple of new sawmill operators, Jase and Dawson Woodruff. I think they can take over within 6 months!!...
08/22/2022

Start training a couple of new sawmill operators, Jase and Dawson Woodruff. I think they can take over within 6 months!! 👍👍

It’s not often I come up with black walnut piece of wood this nice, this size and this pretty. Thank you Kevin Gray and ...
04/27/2022

It’s not often I come up with black walnut piece of wood this nice, this size and this pretty. Thank you Kevin Gray and Angela Isbell Gray for the opportunity to create your new mantle, it was a pleasure! 👍

WOW! What a last week and half we have had, been wide open. Steve has been sawing nonstop and no light at the end of th...
05/19/2021

WOW! What a last week and half we have had, been wide open. Steve has been sawing nonstop and no light at the end of the tunnel right now. We are sawing cedar as fast as we can get it.

We finished two beautiful cedar benches that are ready for delivery. The first one is going to Sherry Inman that will go by the old Rexall Drug Store in Selmer. The other goes to Scotty Robertson to go by his lake.

A HUGE thank you to all our loyal customers who continue to support us! Hope everyone has a safe and blessed week.

We had a new customer show up this week from wildwoods Hideaway in Eutaw Alabama. Rand Haglund called and drove up for a...
04/24/2021

We had a new customer show up this week from wildwoods Hideaway in Eutaw Alabama. Rand Haglund called and drove up for a good load of log siding and shiplap. Looks like they will be a repeat customer with the cabins they are building. Thank you Rand for your business and look forward to doing business again.

Well it has been another very busy week at Patrick Custom Sawing. We have been busy with both the sawmill and siding. We...
04/24/2021

Well it has been another very busy week at Patrick Custom Sawing. We have been busy with both the sawmill and siding. We now have Log Siding, Tongue & Groove and Shiplap available and ready for pickup. We are blessed to have the business during these timess.

A big thanks to Jesus Vela who has been a very loyal customer over the past year for another couple of loads of shiplap and tongue & groove. Some of the shiplap was some cedar that Steve sawed into 6 and 8 inch boards. It was some gorgeous wood.

Also thanks to wildwood Nursery for another large order this week of Tongue & Groove and sawed Pine lumber

04/03/2021

Steve sawing this big honey locust. This piece was over 27 inches at the widest point and some beautiful wood.

Well I have too post this, not everyday is perfect but we do get through them
04/03/2021

Well I have too post this, not everyday is perfect but we do get through them

Well another week in the books for Patrick Custom Sawing. Was a pretty good week overall. Steve has been busy sawing qui...
04/03/2021

Well another week in the books for Patrick Custom Sawing. Was a pretty good week overall.

Steve has been busy sawing quite a bit of cedar some popular and a big honey locust. Part of the honey locust is going to be used at a friend of ours gun store for some new countertops. It is some gorgeous wood.

We have finally got a lead and will have 1x8x12 for our shiplap. We should have it on hand next week. We also should have 1x6 in for tongue and groove next week and we have log siding available now.

Thanks to all of you who have liked and follow us on Facebook and our loyal customers.

Hey from us here at Patrick Custom Sawing. Been busy and trying to get white oak out of the woods but the weather keeps...
03/24/2021

Hey from us here at Patrick Custom Sawing. Been busy and trying to get white oak out of the woods but the weather keeps making it difficult to get it accomplished. Steve has got 3 loads to the stave mill but still got some work to do.

Steve has been sawing some very interesting stuff. Interested in unique woods, live edge, slabs etc.? We’re sawing such stuff pretty regularly. Here is some of the species we have had lately honey locust, black walnut, cherry, and plum!! And of course cedar pretty regularly

If there is is something special you are looking for give us a call to see what we can do for you.

Address

Ramer, TN

Website

Alerts

Be the first to know and let us send you an email when Patrick Custom Sawing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Patrick Custom Sawing:

Shortcuts

Share