Penn McMichael Equipment Trading

04/22/2026

2018 Deere 60G - one owner since new, 6129 hrs, One owner since new, Operating weight of 10,551 lbs, Open canopy, Swing boom, 22” Bucket, Manual coupler, Backfill blade, Auxiliary Hydraulics,
Very good 15” tracks, Very Good machine for hours, Few panels dinged, Well maintained on strict service program
$29,900 in Reidsville, NC

Delivery available.
Financing available.
Message me for more information and pictures

2019 Deere 60G mini-excavator also available

17G 17D 25D 25G 30D 30G 35D 35G 50D 50G 60D 60G
Cat Caterpillar 302 303 303.5 305 305.5 306
Komatsu PC30 PC35 PC45 PC55 PC60 PC65
Volvo ECR18 EC20 ECR25 ECR27 ECR37 ECR40 ECR50 ECR58 EC60
Case CX17 CX19 CX26 CX30 CX37 CX42 CX50 CX60
Sany SY16 SY18 SY26 SY35 SY50 SY60
Hyundai HX17 HX27 HX35 HX40 HX48 HX55 HX60

04/21/2026

No rain? No problem. Make your own rain!

2015 Bell B25E Water Truck
• 8250 hours
• Was part of Bell dealer rental fleet
• 5000 Gallon Team G (now called Premier Water Tanks)
• Cab controls for Front Cannon, 2 front sprayers and 3 rear sprayers
• Tires 60-70% good
• Back up camera
• $99,900 working on a job in North Carolina

Message me for more pictures and details.
Delivery and financing available.

H20 Caterpillar, Cat, John Deere, Terex Komatsu, wagon, watertruck

04/20/2026

Here is a strong Cat 953C with an almost new CAT undercarriage:

2006 Caterpillar 953C with 8462 hours, Complete new CAT undercarriage with 200 hours of use, 4-in-1 Cat bucket in great condition – no visible cracks or welds, Ran great, $59,900 near Greensboro NC

Message me for more details and pictures.
Delivery available.

953B 953 963 963B 963C
Deere 655C 655C II

04/15/2026

Here is a strong ONE OWNER mini excavator ready to get it done!
2019 Deere 60G
5690 hours, Operating weight of 13,250 lbs, been on strict maintenance program its whole life, 18” Bucket in good condition, 65%+ 16” tracks, Leveling blade, Pattern changer, Manual coupler, Auxiliary hydraulics, Machine just serviced, Runs great and functions as it should, $37,500 near Raleigh

Delivery and financing available
Message me for more pictures and information

17G 17D 25D 25G 30D 30G 35D 35G 50D 50G 60D 60G 75D 75G 85D 85P
Cat Caterpillar 302 303 303.5 305 305.5 306 307 307.5 308
Komatsu PC30 PC35 PC45 PC55 PC60 PC65 PC78 PC88
Volvo ECR18 EC20 ECR25 ECR27 ECR37 ECR40 ECR50 ECR58 EC60 EC65 ECR88
Case CX17 CX19 CX26 CX30 CX37 CX42 CX50 CX60 CX60 CX75 CX80
Sany SY16 SY18 SY26 SY35 SY50 SY60 SY70 SY75 SY80
Hyundai HX17 HX27 HX35 HX40 HX48 HX55 HX60 HX85

04/14/2026

Want to buy Deere 750K or 750L

I have a North Carolina customer in need of:
Deere 750K or 750L
LGP
Under 3000 hours
Cab/Air
Ripper hydraulics or a 3 shank ripper
6-Way PAT blade
Good undercarriage

Message me if you have something that migh could work!

Penn McMichael

Call now to connect with business.

04/01/2026

2019 Deere 130G hydraulic excavator with 4215 hrs, TAG Hydraulic thumb, TAG Dromone hydraulic coupler, TAG 36” bucket in excellent condition, Pattern Changer, Back up camera, Cold Air conditioning, Good undercarriage with 24” pads, Under 8'6 wide!
$79,900 in Reidsville, NC

Message me back for more information and pictures.
Delivery and financing available.

Volvo EC140 EC160 Cat 315 317 Deere 130G 160G Komatsu PC130 PC170 Sany SY135, SY155, Case CX130 CX160 Link Belt 130LX 140LX 160LX

04/01/2026

Here is a great machine for clearing, loading brush into a grinder or whatever else you need done!

2022 Sany SY225C LC Hydarulic Excavator with Full machine warranty factory until 2027, Only 2197 original hours, JRB hydraulic coupler, Sany (made by JRB) 48” Heavy Duty Bucket, Sany (made by JRB) hydraulic thumb, Cummins 6.7L engine producing 164 hp, Good 9 roller long undercarriage with sealed and lubricated track chain, Pattern Changer, LED Work lights, Rear Safety camera, Factory installed multi-rotational auxiliary hydraulics, 9” digital screen, Digital power mode selection: 3 power modes—low, standard, and high, Digital tool selection: bucket, shear, hammer, etc., Heated or cooled food/beverage storage, Power boost on right joystick, Bluetooth radio, Operating weight of 54,013 lbs, $99,900 near Raleigh, North Carolina

Delivery and financing available.
Message me for details and more pictures.

SY225 Cat Caterpillar 320, 323, 326, Komatsu PC210LC, PC220LC, PC240LC, Case CX210, CX225, CX240, Volvo EC210, EC220, EC225, EC240, Hyundai HX210, HX220, HX225, Link Belt Link-Belt 210 250, Deere 210G 210P 245G 245P 250G 250P, XCMG XE210 XE225 XE235 XE250

03/26/2026

2023 Dynapac CP1200 Pneumatic Roller Priced to Sell!
642 hours, Dealer maintained since new, Dyn@Link fleet telematics system, 9 wheel pneumatic roller with coca mats, Cummins QSF 2.8L FT4 engine producing 74 hp (no DEF), Eco mode for fuel efficient operation, 180 degrees full operator station swivel and fully slides to either side of roller for optimal view of work, Pressurized Water System (108 Gal. Tank), Dry operating weight of 12,300 lbs, $69,900 in North Carolina

The CP1200 is a strong fit for crews looking for a late-model pneumatic roller that is easy to transport, easy to operate, and well suited for density work and finish rolling. Its compact footprint makes it a practical choice for paving crews that need a versatile roller for lot work, patching, and smaller asphalt jobs without dragging a larger machine to every site.

Delivery and financing available!
Message me for more pictures and information.

CP1200W CP42 CP150 Bomag BW11RH BW11RH-5 BW12R
Cat Caterpillar CW14 CW16 PS-130 PS130 PS-150 PS150 PS-150C PS150C Sakai TS160 GW750-2 Volvo PT125 PT140
Hamm HD14TT HP100 HP180

03/24/2026

***Sold**
2025 Cat D5 LGP dozer with only 479 Original hours, CAT Premier warranty until 2030 or 3000 hours, PAT Blade, Factory integrated Cat Grade with 3D uses GNSS/GPS = no masts & compatible with radios, Trimble base station included (was a $16,113 addition ), Free PM’s until through early 2028, Grade and Assist technology features help boost productivity and ease of operation for operators of varied skill levels resulting in up to 50% more production, Undercarriage like new, 33” LGP pads, Security strobe lights – (was a $4000 addition), Cat C7.1 engine producing 170 net horsepower, Operating weight of 42,263 lbs,
$369,900 in North Carolina

Delivery and financing available.
Approved buyers may be able to take over CAT Finacial loan at 4.33% APR

D4 D6 Komatsu D51PX D51PXi D51EX D51EXi D61PX D61PXi D61EX D61EXi D65PX D65PXi D65EX D65EXi John Deere 700K 700L 700P 750K 750L 750P 850J 850L 850P

03/20/2026

Could you use a hard hitting 84" smooth drum roller with a padfoot kit? ^^^
2023 Dynapac CA2500D dirt compactor with 1881 Hours, Dealer maintained since new, 84” smooth drum with padfoot kit with cleanout bars, Eco Mode for fuel efficiency, Dynapac’s Seismic System – Revolutionary vibration-to-ground controls that saves up to 10% in fuel and component life, Dyn@Link telematics system, Powered by Cummins QSF3.8 engine producing 135 hp, 180 degrees operator station swivel for optimal sight, Tires 60%+, 22,230 lbs operating weight
$99,000 in North Carolina

Delivery and financing available
Message me for more!

Cat Caterpillar CS10 CS11 CP10 CP11 CS12 CP12 CS13 CP13 CS54 CS54B CP54 CP54B CS56 CS56B
Sakai SV544D SV544DF SV544T SV544TB SV544TV
Bomag BW211 BW 211 BW213 BW 213
Hamm HC10 HC11 HC12 HC13 HC14 HC100 HC110 HC120 HC130 HC140
Volvo SD105 SD110 SD115 SD125 SD125B SD116 SD122 SD135
Sany SSR120 SSR150 SSR180
Case SV207 SV211 SV212 SV213 SV215 SV217

03/16/2026

A very nice haul truck:
2019 Terex TA300 with 4791 hours, Cold Air Conditioning, Tires 60-70%, Fully Automatic w/Manual Over-Ride & Retarder Transmission, Rearview camera, Straight truck , Bed in excellent condition, Runs through all gears good, Owner had it on lease, bought it, and now done using it, 370 HP Scania D C9 Diesel Engine, 54,000lb operating weight, 30.9 ton max payload, 22.9 cubic yard heaped capacity, $119,900 in Reidsville, NC

Delivery and financing available

Cat Caterpillar 725 730 735 740 Deere 250 300 310 360 Komatsu HM250 HM300 HM350 TA27 TA30 TA35 TA40 Rokbak RA30 RA40

03/12/2026

Loaded up with features and warranty!
2023 Sany SY225C LC
• Full machine factory warranty - 5000 hours or April 4, 2028
• Only 1057 original hours
• JRB hydraulic coupler
• Sany (made by JRB) 48” Heavy Duty Bucket
• Sany (made by JRB) hydraulic thumb
• Cummins 6.7L engine producing 164 hp
• Good 9 roller long undercarriage with sealed and lubricated track chain
• Pattern Changer
• LED Work light
• Rear Safety camera
• Multi-rotational auxiliary hydraulics
• 9” digital screen
• Digital power mode selection: 3 power modes—low, standard, and high
• Digital tool selection: bucket, shear, hammer, etc.
• Heated or cooled food/beverage storage
• Power boost on right joystick
• Bluetooth radio
• Operating weight of 54,013 lbs
• $119,900 near Raleigh, NC

Delivery and financing available.
Message me back for more pictures!

Cat Caterpillar 320, 323, 326, Komatsu PC210LC, PC220LC, PC240LC, Case CX210, CX225, CX240, Volvo EC210, EC220, EC225, EC240, Hyundai HX210, HX220, HX225, Link Belt Link-Belt 210 250, Deere 210G 210P 245G 245P 250G 250P, XCMG XE210 XE225 XE235 XE250