What are the opening hours?

Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

CNA Flexible Tooling

Home
United States
Renton, WA
CNA Flexible Tooling

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from CNA Flexible Tooling, Business Center, Renton, WA.

01/19/2023

"In the past, because each skin panel has its own contour, a separate tool was required for setup and trimming [of each part]. Today, only one tool, the universal trim fixture [or POGO], is required. The biggest benefit is the drastic reduction in the number of [hard fixtures], which cost $12 million." This saved Boeing around $8 million over time, they reported.

- Yvonne Higgins, Boeing News, Apr. 16, 1993

01/05/2023

At CNA, we're proud to have been featured in many Aviation Week articles over the years. Here's one of our favorite clips from more than 20 years ago:

"CNA's 'Pogo' flexible tooling system is finding increasing use in aerospace manufacturing as operational experience increases and the technology is adapted to perform new tasks....

"The flexible pogo fixturing system reduces tooling costs by as much as 95%, cuts set-up time by up to 80% and increases machine tool utilization significantly....

"In addition to decreasing traditional 'hard' tooling lead times, users can rapidly adapt to component changes by reprogramming the position of pogo actuators. The modular system allows multiple tool changes per shift without significantly slowing production."

With our newest Pogo system, your company will take production to new highs.

Contact us with inquiries here:
[email protected]

01/02/2023

Happy New Year! We hope that 2023 will bring good things to all individuals and businesses around the world. We know that the past few years have been hard, but we're always optimistic for the future. Here's to a great 2023!

12/22/2022

In today’s global environment, manufacturers face immense pressure to respond to change and to have agile manufacturing capabilities. CNA’s mission is to provide flexible and agile tooling solutions that will enable its customers to advance into the next century with confidence in their ability to respond to market demands.

The dedicated team at CNA works side-by-side with each customer to understand their requirements and to define and implement flexible and agile tooling solutions that will significantly improve their production capabilities while reducing manufacturing costs.

Contact us to learn more: [email protected]

12/08/2022

Check out our new logo! Thanks to James N Arrington for the design! We're always pleased with the work he does, check out his website with the link below!

www.pukrufus.com

And check out our website to see an example of his work:
cnaflextool.com

11/25/2022

This Black Friday, as we're all out buying things, we thought it would be a fitting opportunity to tell you what's included when you buy a Pogo system!

First off, you get the POGO®-Pods or POGOs you ordered (no surprises there...), a table to hold them securely, an HMI (computer and wiring) to control the system, and plenty of spare parts. For a smooth experience, we've also thrown in training for your employees, delivery and setup at your location, and a 1-year warranty!

So what are you waiting for? Reach out to us at [email protected]

11/24/2022

Today we at CNA are especially grateful for all of the connections we've made this year. From CAMX to IMTS to meeting clients all over the country, we're grateful for the amazing people we get to call friends and clients.

11/23/2022

FAQ: what if one of the Pogos breaks? Does the whole machine go down until it's repaired?

First off, Pogos don't break often. In the rare case that they do, you just pull out the broken one, put in a replacement Pogo and your machine is up and running in just a few minutes! Send the broken Pogo to us and we'll fix it up for you, or do it yourself if it's an easy fix.

Want one in your facility? Contact us at info.cnaflextool.com
Check out our website at: cnaflextool.com

11/22/2022

This is our machine at an Airbus manufacturing facility. It was paired with a waterjet for over 10 years and outlasted the machine it was under!

This machine replaced dozens of heavy metal fixtures and stayed consistent for the Airbus team for 10 years, helping with fast and easy changeovers!

Want one at your facility? Contact us here: [email protected] or visit our website here: https://cnaflextool.com

11/11/2022

At CNA, we literally invented the field of flexible tooling, and 26 years later we're still providing the most expertise and the only reliable systems on the market.

Check out our website here: cnaflextool.com
Or contact us directly about our system: [email protected]
We're happy to talk.

11/09/2022

The POGO®-Pod allows you to manufacture like never before. Combining the best in flexible tooling technology with it's small size, the POGO®-Pod will allow small manufacturers access to a lifechanging technology that has so far been reserved for the biggest manufacturers in the world. And all that at a price that won't make you think twice.

The POGO®-Pod is designed to hold composite and metal parts firmly in place. The system can be used to compliment integrated CNC drilling, any type of work done by hand, laser scribing or cutting, trimming, inspection, and assembly. Best of all, the POGO®-Pod repositions in

Address

Renton, WA
98057

Opening Hours

Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Website

http://cnaflextool.com/

Alerts

Be the first to know and let us send you an email when CNA Flexible Tooling posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CNA Flexible Tooling:

Shortcuts

Want your business to be the top-listed Business in Renton?