Breezy Saber Works

08/28/2026

Installed with a Crystal Focus X

08/28/2026

This is an Electrum Sabercrafts Aurora, installed with CFX and Bluetooth for Todd. Initially, Todd wanted to utilize the touchpad for the switches, but that was not possible for this build. I came up with a solution that was low-profile while keeping the elegant look of the saber.

• Installed with Crystal Focus X neopixel
• Custom chassis design by me
• Shtok v4 lit PCB
• Connects bottom to top using a thin neck PCB
• Bluetooth module
• Kill switch
• 2-button setup with tactile switches using 2x three spring-loaded connectors
• 14-pixel accent strip under clamp card
• 24mm Smuggler's Outpost speaker

08/24/2026

08/24/2026

This is "The Last Revanchist," Saberforge ASP lightsaber installed with Proffie for J. All parts were picked by J himself, sent to get etched, then made its way to me for a full install. I also built a 33" 1" custom pixel blade that has been sanded for J.

• Etching by Bryan Lynn at Civilized Weaponry Services
• Custom chassis, designed by me
• Installed with Proffie 3.9 neopixel
• Exposed crystal chamber with a real quartz crystal
• 2-button setup with KR Sabers pixel switches
• Kill switch
• 18650 battery
• 24mm Smugglers Outpost Speaker

08/11/2026

Full install with Proffie and all the fixings at

08/11/2026

This is The Imperialist: Tormac's Ghost, produced by Saberbay. It's been beautifully powder-coated and installed with a Proffie in my own chassis design, as well as a marble in the crystal chamber for Chris. This thing has all the bells and whistles.

• Installed with Proffie Neopixel
• Powder coated by Shane at Saberbay in Black Chrome, Very Red, and Black River
• Custom chassis designed by me
• Shtok v4 lit PCB
• Micro accent pixel
• Bluetooth Module
• Marble crystal with 2X accent pixels to light it up
• 2-button setup with one being a 2 led pixel switch
• OLED display
• Kill switch
• 18650 battery
• 28mm Saber Merchant speaker

08/10/2026

This is the newest Master QGJ from KR Sabers/The Saber Armory. It has been installed with a Proffie in their Eco-CC chassis for Chris.

• Installed with Proffie neopixel
• Eco-CC chassis from KR Sabers
• KR Sabers lit PCB
• Real quartz crystal
• 1-button setup
• Kill switch
• 1.3mm charge port
• 28mm KR Sabers speaker in a speaker pod

08/03/2026

This is a Korbanth/89 Sabers Graflex Supreme set in the ESB configuration, installed with Proffie. I actually installed this saber a few years ago in the ANH configuration, and since then, it's changed hands a few times. It came back because the original chassis was broken and the switches did not work.

- New chassis designed by me
- Installed with Proffie 3.9 neopixel(Originally 2.2)
- Shtok V3 Eco lit PCB
- 2-button setup
- Non-removable 18650 battery
- 2.1mm recharge port with kill key
- Crystal chamber with real quartz crystal
- 28mm The Saber Merchant speaker

07/18/2026

This is a Saberforge ASP build I have named “The Forsaken,” put together from SF ASP parts that I picked out. It is installed with a Proffie and will be listed for sale at the shows I attend.

- Installed with Proffie 2.2 neopixel
- Custom chassis by me
- Weathered by me
- Shtok v4 lit PCB
- 2-button setup
- 2x LED AV switches red and blue
- 18650 battery
- Killswitch
- 28mm Saber Merchant speaker

07/13/2026

This is a Saberbay Petro lightsaber replica installed with a Proffie. It will be listed for sale at shows I attend.

• Saberbay 2-part chassis
• Installed with Proffie 2.2
• Shtok v3 lit PCB
• 2-button setup
• 6-trace rotary PCB
• 18650 battery
• 28mm Saber Merchant speaker