Modern Plastics

Modern Plastics Modern Plastics is a high-performance engineering grade and medical grade plastics distributor and custom plastics fabricator/machining company.

The company is ISO 9001:2015 and ISO 13485:2016 certified AS9100 and AS9120 certified Modern Plastics is a high-performance engineering grade and medical grade plastics stock shapes • We are expert custom plastics fabricators and also supply plastic machined parts.

Engineering plastics can play an important role in oil and gas equipment where chemical resistance, wear performance, lo...
09/02/2026

Engineering plastics can play an important role in oil and gas equipment where chemical resistance, wear performance, low friction, and reliability are critical.

Applications may include valve and pump components, seals, bushings, bearings, electrical insulators, sensor components, wear pads, and fluid-handling parts.

Modern Plastics supplies high-performance materials and precision-machined components for demanding industrial applications.

Email us: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

UHMW-PE is a tough, wear-resistant engineering plastic commonly used in applications where low friction, impact resistan...
09/01/2026

UHMW-PE is a tough, wear-resistant engineering plastic commonly used in applications where low friction, impact resistance, and durability are important.

Common uses include wear strips, chain guides, chute liners, rollers, bearings, bushings, conveyor components, and heavy equipment parts.

Modern Plastics supplies UHMW-PE materials and provides precision machining and fabrication for custom industrial applications.

Email us: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Alternative-energy systems can create demanding conditions for plastic components.PEEK may be evaluated for selected par...
08/28/2026

Alternative-energy systems can create demanding conditions for plastic components.

PEEK may be evaluated for selected parts used in hydrogen and fuel-cell systems, battery-production equipment, wind-energy equipment, solar manufacturing, electrical insulation, and fluid-management systems.

Its combination of temperature capability, chemical resistance, strength, wear resistance, and dimensional stability can support challenging applications.

Is PEEK the right material for every part? Not necessarily. Cost, operating conditions, part design, grade, and alternative materials should always be reviewed.

Read more: https://modernplastics.com/peek-alternative-energy-applications/

Email: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Need a custom machine guard, safety shield, cover, or equipment enclosure?Modern Plastics offers:• Precision cutting and...
08/27/2026

Need a custom machine guard, safety shield, cover, or equipment enclosure?

Modern Plastics offers:
• Precision cutting and CNC routing
• Drilling and machining
• Heat bending and forming
• Edge finishing and polishing
• Bonding and assembly
• Prototype and short-run production

Polycarbonate is often selected for impact-resistant guards, while acrylic can be a good option when optical clarity and a polished appearance are priorities.

Learn more about our fabrication capabilities:
https://modernplastics.com/plastics-fabrication/

Request a quote at [email protected].
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Engineering plastics can provide electrical insulation while also supporting the mechanical requirements of a finished c...
08/26/2026

Engineering plastics can provide electrical insulation while also supporting the mechanical requirements of a finished component.

Modern Plastics can help with custom-machined insulators, spacers, connector bodies, sensor housings, terminal supports, and other drawing-based parts.

Material options may include ULTEM™ PEI, PEEK, Noryl® PPO, phenolic, PTFE, polycarbonate, and PPS.

Send us your drawing, quantity, tolerances, and application details for review:
https://modernplastics.com/precision-plastic-machining/

Email: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Extreme heat, chemical exposure and demanding operating conditions require materials engineered for the job.PEEK offers ...
08/25/2026

Extreme heat, chemical exposure and demanding operating conditions require materials engineered for the job.

PEEK offers an excellent combination of high-temperature performance, chemical resistance and mechanical strength. In oil and gas applications, it may be used for seals, bearings, bushings, valve components, electrical insulation and other precision-machined parts.

Choosing the correct PEEK grade is important. Temperature, pressure, wear and chemical exposure should all be considered.

Learn more about PEEK for oil and gas applications:
https://modernplastics.com/peek-oil-and-gas-applications/

Need help selecting or machining the right material?
Contact [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

PRODUCT SPOTLIGHT: NYLONNylon is a strong, wear-resistant engineering plastic commonly used for bushings, bearings, gear...
08/24/2026

PRODUCT SPOTLIGHT: NYLON

Nylon is a strong, wear-resistant engineering plastic commonly used for bushings, bearings, gears, rollers, wear pads, spacers, and electrical insulators.

It offers a useful combination of strength, toughness, low friction, machinability, and reduced operating noise. Nylon components can also provide a lightweight alternative to metal in suitable applications.

Because different nylon grades respond differently to moisture, heat, load, and wear, material selection should always be based on the actual operating environment.

Modern Plastics supplies nylon sheet, plate, rod, and tube and can assist with cutting, machining, fabrication, and custom casting.

Learn more: https://modernplastics.com/products/nylon/

Email: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Fluid handling systems often require materials that can support chemical exposure, dimensional stability, temperature, p...
08/21/2026

Fluid handling systems often require materials that can support chemical exposure, dimensional stability, temperature, pressure, wear, and long-term reliability.

Engineering plastics may be used for:
• Pump components
• Valve seats and guides
• Manifolds
• Fittings and connector bodies
• Seal supports
• Tubing supports and clamps
• Sensor housings
• Flow-control components

Depending on the application, materials such as PEEK, PTFE, PVDF, acetal, nylon, PPS, polypropylene, or stainless steel may be considered.

Modern Plastics can help compare material options before stock shapes or machined components are ordered.

Read more here: https://modernplastics.com/peek-fluid-handling-applications/

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Nylon is often used by OEMs and machine builders when components need strength, wear resistance, and repeatable performa...
08/20/2026

Nylon is often used by OEMs and machine builders when components need strength, wear resistance, and repeatable performance.

Common nylon applications may include:
• Bushings and bearings
• Rollers and gears
• Wear strips
• Slide plates
• Guide rails
• Chain guides
• Spacers and supports
• Machined replacement parts

The right grade depends on load, speed, moisture, temperature, chemical exposure, tolerances, and the final service environment.

Read more here: https://modernplastics.com/nylon-for-oem-components/

Email us here: [email protected]
ISO 9001:2015 | AS9100D | AS9120B | ISO 13485:2016 Certified

Address

88 Long Hill Cross Road
Shelton, CT
06484

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

(203) 333-3128

Website

Alerts

Be the first to know and let us send you an email when Modern Plastics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Modern Plastics:

Shortcuts

Share

Category