Larry Myhre's Hand Crafted Bamboo Rods

Larry Myhre's Hand Crafted Bamboo Rods Here's how I make my rods:

All of my rods are made in the classic hexagon shape. Each half of the culm is hand split into 24 strips. Olive St.

The rod blank itself is hand planed from the finest Tonkin cane (Arundinaria Amabilis) available. Each 12- foot culm (or pole) of cane is hand-selected for each rod with an eye for depth of power fibers and lack of cosmetic blemishes on the surface of the cane. If the rod is to be flamed, the culm is subjected to a flame from a hand-held propane torch.The culm is cut in half. Six strips are select

ed for the butt section and 12 strips for the tip section. The nodes are arranged in a 2 x 2 pattern for most rods and then the strips are cut to length. Each of the strips is straightened and the nodes flattened before planing them into untapered 60-degree angled strips ready for heat treating. After heat treating the strips are hand planed to final dimensions in an adjustable planing form using a hand plane. The strips are then glued using an epoxy glue and bound together under pressure. After the epoxy has cured, the blank is scraped and carefully sanded. The finest nickel silver ferrules available are applied and the blank is cut to its proper length. Guides are wrapped with silk thread and receive several coats of spar varnish. Grips are made of the finest Portugese cork. Reel seats are nickel silver and most utilize highly-figured walnut spacers turned in my shop. The rod is then dip-varnished three times in high quality polyurethane varnish, hand sanded between each coat. After the varnish has cured, the rod is hand rubbed to a glossy finish. Here's what I charge:

I charge $650 plus $25 shipping for a two piece, two tip rod of your choice with a rod bag and an aluminum storage tube. A three piece rod is $100 more. Delivery will be within three months of order. I have a five day inspection period during which the rod can be returned for a full refund. I guarantee my work so if a ferrule comes off or a reel seat comes unglued, I will repair it at no cost and pay for shipping. I use only the highest quality components for the rod. Nickel silver ferrules, nickel silver reel seat with highly figured wood, the best line guides out there, an agate stripping guide if you want one and the best quality cork I can find. Rod Models:

I have access to most of the tapers of the old-time master rod makers such as Dickerson, Gillum, Payne, Young, Garrison and others and I will gladly build the rod of your choice using any of these tapers. In addition, I have developed my own rod tapers which are heavily influenced by the classic rod makers such as Lyle Dickerson, Pinky Gillum, Everet Garrison and others. My tapers can be best described as moderately fast. The action is not as stiff (fast) as modern graphite rods, but instead has is a very powerful, yet delicate, feel which makes for a rod that is easy on the casting arm and very pleasurable with which to fish.


6'6" #4 line two piece
7' #4 line two piece
7' #5 line two piece
7'6 #5 line two piece
8' #5 line two piece
8' #6 line two piece
8' 6" #7 line two piece

Larry Myhre
2505 S. Sioux City,IA 51106

Phone: (712) 276-5965
email: [email protected]

Former tournament angler, hunting and fishing guide, Inducted in the National Freshwater Fishing Hall of Fame in 2017. D...
07/20/2024

Former tournament angler, hunting and fishing guide, Inducted in the National Freshwater Fishing Hall of Fame in 2017. Developed and produced the Award-winning Outdoorsmen Adventures television show, the Outdoor Adventures radio and the Of the Outdoors syndicated columns. Award winning writer, broadcaster, producer

01/30/2024
Another bamboo rod escapes the workshop. This is a 7-foot, 6-inch two piece, two tips 6 weight. It's my taper and throws...
04/01/2018

Another bamboo rod escapes the workshop. This is a 7-foot, 6-inch two piece, two tips 6 weight. It's my taper and throws a nice line. Should be a good all-around rod.

03/14/2018

I'm in this video. Can you find me? Hint: Stockyards.

Just took my new bamboo casting rod out of the varnish tank this morning. Will put a reel on it this afternoon and do so...
12/03/2017

Just took my new bamboo casting rod out of the varnish tank this morning. Will put a reel on it this afternoon and do some lawn casting. The rod is 6-foot, 6-inches long and is a medium action. The taper was taken from a Vince Marinaro rod which was published on the internet. Marinaro was a Pennsylvania angler who wrote a couple of books on trout fishing and was quite well-known back in the 1950s.

When you have tied flies for over 50 years, dreaming of trips to the fabled western rivers, you finally reach a point wh...
11/26/2017

When you have tied flies for over 50 years, dreaming of trips to the fabled western rivers, you finally reach a point where you have more than enough flies to fish with. Then you begin to tie just for the challenge and then, finally, to display. That was the case with these Carey Stevens streamers. She was a famous fly tyer in the Rangely Lakes region of New York. She tied specific patterns to be both cast and trolled for the trophy brook trout that inhabited those lakes at that time. The streamer on the bottom is named "Larry." I just had to include that one. To see a few other flies I have tied, check out my web site at: custombamboorods.com

Address

6809 Norwood Court
Sioux City, IA
51106

Alerts

Be the first to know and let us send you an email when Larry Myhre's Hand Crafted Bamboo Rods posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Larry Myhre's Hand Crafted Bamboo Rods:

Share