Hydro Engineering Innovation

10/14/2026

Protecting the next waterway starts with a decontamination system that fits the job.

That means matching equipment to the treatment protocol, the boats being served, and the conditions at the site. Controlled hot water, appropriate watercraft attachments, and wash water containment help trained crews carry out that work.

At Hydro Engineering Innovation, we help agencies, marinas, and waterway managers configure mobile and fixed watercraft decontamination systems around their program’s requirements—from vessel traffic and available utilities to climate and runoff management.

Planning a new decontamination station or upgrading an existing one? Let’s talk about the right setup for your operation.

10/06/2026

Embassies plan vehicle movements carefully. So do many other operations with controlled access.

Routine washing can still require sending a vehicle and driver off site. Bringing that work to the facility can give teams more control over when washing happens and reduce wash-related trips.

Hydro Engineering Innovation’s ICW combines washing equipment with a modular Hydropad rack that sits above ground. Each proposed setup begins with the fleet, available space, utilities and a plan for wash water.

Managing a fleet at an embassy, consulate or other controlled-access facility? Contact [email protected] to discuss your site.

08/20/2026

Hydro Engineering was brought in to help a mining customer address several environmental challenges and make improvements to better align their facility with their environmental goals.
The mine had an existing tailings pond that was in poor condition and needed to be addressed. They were looking at several alternatives, including repairing, rebuilding, or upgrading the existing pond. Hydro Engineering was able to provide an alternative solution that eliminated the need for a pond and saved them the expense of repairing or maintaining that pond moving forward.
Our solution allows water from their shop and wash bay to collect in an in-ground collection tank. Solids are automatically removed from the collected water, and the clarified water is pumped from the clearwell through a filtration system. The treated water can then be reused in the wash bay, significantly reducing the amount of fresh water required.
At the same time, the mine’s existing wash bay had been out of commission for several years. Hydro Engineering worked with the mine to refurbish the existing wash equipment and integrate it with the new wash equipment, water collection, and filtration system.
This project is another great example of the versatility and expertise of Hydro Engineering and our products. Rather than simply replacing an existing system or rebuilding the tailings pond, we were able to develop a solution that addressed multiple challenges at the same time.
The result was significant cost savings for the customer, while also making a substantial environmental impact through water conservation, wastewater management, and the reuse of treated water.

08/11/2026

Hydro Engineering Innovation recently completed a custom heavy-equipment wash and water-treatment system designed to WASH / COLLECT / RECYCLE.

The system combines high-pressure hot-water cleaning, handheld water cannons, high-volume wash monitors, catwalks and a climate-controlled equipment enclosure—all while recycling 100% of captured wash water.
A complete solution for cleaner equipment and responsible water management.

07/23/2026

Hydropad above-ground steel wash rack rated for haul truck washing in the Australian outback. 100% of all water collected is filtered and reused. This also shows a drive-in cleanout for liquid/solid separation.

Learn more about Hydropad wash systems at https://www.hydroblaster.com/Collect/

07/17/2026

When the U.S. Coast Guard needed a better way to wash the turbine engines on their C-130s, they came to Hydro Engineering with the requirement. We engineered the system, ran it through full testing, and earned approval from both the USCG and Rolls-Royce, the engine manufacturer, for use on their engines.
That kind of dual sign-off is rare. It's also the whole point: when you're washing the engines that keep an aircraft mission-ready, "close enough" isn't an option.
What makes the TEWS unique:
→ Connects to and washes all four turbine engines on a C-130 simultaneously—a full four-engine wash plus three rinses in about 21 minutes, inside Rolls-Royce's window for a high-RPM burn.
→ Engineered to meet Rolls-Royce's exact wash requirements—and approved for the field.
→ Built-in line evacuation clears water for freeze protection and air-blows the fuel lines when required.
→ Self-contained: mounted on a heavy-duty steerable flight-line trailer, diesel-powered, ready to go where the aircraft is.
Now carrying two National Stock Numbers—a defined, orderable part of the military supply chain, not a one-off.
Designed, tested, and built in-house in Salt Lake City. ISO 9001:2015 certified. Made in the USA.
, , ,

03/26/2026

Maximize job site cleanliness and compliance with the HE‑AUWS/W Automatic Undercarriage & Wheel Wash System from Hydro Engineering Innovation.

Engineered for construction, mining, and industrial operations, this fully automatic vehicle wash system removes heavy mud, dirt, and debris from undercarriages and wheels with sensor‑activated operation, self‑cleaning solids handling, and optional full‑coverage wash arch. Its water recapture and recycling capabilities support environmental goals while keeping roads and sites clean and compliant.

Learn more: hydroblaster.com/Apps/Construction/Undercarriage.htm

https://hydroblaster.com/Apps/Construction/track-out-control-wheel-wash-system-auws-w.htm

Eliminate construction site track-out with Hydroblaster’s automatic wheel and undercarriage wash systems. Improve compliance, reduce mud on roads, and protect your jobsite with proven track-out control solutions.

03/08/2026

Final Day at CONEXPO

What an incredible week at CONEXPO!!! This has easily been one of the best shows. We had the opportunity to meet many new contacts and connect with great companies looking for solutions to their wash and wastewater challenges.

At Hydro Engineering Innovation, we specialize in complete wash system solutions, from industrial pressure washers to wash water collection and recycling systems designed to help operations clean equipment effectively.

If you’re looking for reliable solutions for equipment washing, water containment, and wastewater management, we’d love to help.

Check us out at www.hydroblaster.com to learn more about our products for wash systems, water collection, and wastewater recycling.

Hydropad- https://www.hydroblaster.com/Collect/

Water Cannon - https://www.hydroblaster.com/Wash/Water-Cannon.htm

Automatic Undercarriage & Wheel Wash - https://www.hydroblaster.com/Specialty/AUWS.htm

03/07/2026

Day 4 at CONEXPO

Today we’re highlighting the Portable Wash Racks - Hydropad System from Hydro Engineering Innovation.

Hydropads are above-ground, modular wash platforms designed to capture wash water and solids during equipment cleaning. The collected runoff is directed into a gutter system for proper handling, treatment, or recycling.

✔️ Above-ground installation with minimal site work
✔️ Captures wash water and solids
✔️ Built for heavy equipment and fleet washing

Solutions like Hydropads help operations centralize washing while supporting responsible wastewater management.

Learn more:
https://www.hydroblaster.com/Collect/Hydropads.htm

03/05/2026

Day 3 CONEXPO-CON/AGG

💦 Water Cannon Highlight

Big debris? No problem.

Our Water Cannon on display at Booth SV2050 delivers powerful, controlled cleaning for demanding environments.

If you’re at CONEXPO this week, stop by and see Hydro Engineering Innovation.

https://www.hydroblaster.com/Wash/Water-Cannon.htm