07/03/2026
Watch me force ice maker WPW10300022 into the harvest cycle. Locate the T and H terminals inside the control module and briefly connect them with an insulated jumper wire. I used a paper clip along with some electrical tape. Hold the wire in place for a few seconds until the motor engages and the gear begins to rotate. Once it starts, you can remove the jumper wire. By doing this, you're basically reassuring that the ice maker is working properly. If the ice maker fails to cycle when you jump the T and H terminals, the motor or module may be defective. Also please remember attempting to manually jump electrical terminals is extremely hazardous as it involves exposure to live 120V AC power, which carries a severe risk of electric shock or short-circuiting the module.