Mint Turbines LLC

Call Directions Website Contact the business

Mint Turbines LLC Based in Stroud, OK USA 🇺🇸 Mint Turbines LLC in Stroud, Oklahoma, specializes in the maintenance and repair of aircraft turbine engines.

OEM-Authorized FAA Part 145 MRO facility for Pratt & Whitney Canada PT6A & PT6T, GE T700, and Ozark T53 turbine engines providing repair, overhaul, testing, training and field support for commercial & military operators. We are an FAA-authorized and EASA-approved facility for maintenance, repair, test and overhaul of the Ozark Aeroworks T53 (commercial and military), Pratt & Whitney PT6A and PT6T series and General Electric restricted category T700 series engines. Since 1981, our reputation has been built on superior customer service and support. PRODUCTS & SERVICES
Maintenance and repair of PT6A, PT6T, T53 and GE Restricted Category T700 gas turbine engine, component and accessory needs. P&WC PT6A - Small
PT6A-11 | PT6A-11AG PT6A-15AG | PT6A-110 PT6A-112 | PT6A-121
PT6A-21 | PT6A-27
PT6A-28 | PT6A-34
PT6A-34AG | PT6A-34B
PT6A-35 | PT6A-36 | PT6A-114 PT6A-114A | PT6A-135 | PT6A-135A

P&WC PT6A - Medium
PT6A-38 | PT6A-41
PT6A-42 | PT6A-42A | PT6A-60A PT6A-60AG | PT6A-61 | PT6A-52

P&WC PT6A - Large
PT6A-65AG | PT6A-65B PT6A-65R | PT6A-65AR
PT6A-67 | PT6A-67A
PT6A-67AF | PT6A-67AG PT6A-67R | PT6A-67B | PT6A-67D

P&WC PT6T - Twin Pac
PT6T-3 | PT6T-3B
PT6T-3BE | PT6T-3BF PT6T-3BG | PT6T-3D | PT6T-3DF

Ozark T53 - Single
TS3-L-13B | T53-L-703 T53-13B | TS3-17A | T53-17A-1 T53-17B | T53-17BCV

GE RESTRICTED CATEGORY T700 - Single
T700-GE-700
700 | 701 | 701A | 701C | 701D



Social Media Policy
The Mint Turbines social media channels are intended to provide a place where those interested in learning about turbine engine maintenance, repair and overhaul can find information and resources. All users are required to comply with the following Comment Policy:

All posts and comments are subject to review.
- Per Meta guidelines, all content on Mint Turbines’ page must comply with the Statement of Rights and Responsibilities.

-Mint Turbines reserves the right to accept, reject or remove any post or comment at Mint Turbines’ sole discretion, including, but not limited to, those that spread misinformation, disinformation, misinformation, content that is obscene, sexual, pornographic, promotion of discrimination on the basis of a protected class, violations of legal ownership interest (copyright), violations of law or encourages illegal activity, defamation, true threats of violence, spam, malware or viruses. All posts and comments should be civil.
- Obscene, discriminatory, racist or sexually explicit language is prohibited. Likewise, harassing, defamatory or truly threatening comments are prohibited. No soliciting.
- Postings for commercial purposes or profit are prohibited. No illegal activity.
- Postings that suggest, incite or encourage illegal activity are prohibited. Policy changes
- This policy is subject to amendment or modification at any time so that its continued use is consistent with its intended purpose as a limited forum.

Prepare your T700 for next season with performance verification in our state-of-the-art test cell.Identify issues, verif...
10/14/2026

Prepare your T700 for next season with performance verification in our state-of-the-art test cell.

Identify issues, verify performance and head into next season with confidence.https://mintturbines.com/engines/t70

32 years, countless gearboxes and quite a few miles along the way.Bobby Dickinson joined Mint Turbines in 1994, starting...
10/12/2026

32 years, countless gearboxes and quite a few miles along the way.

Bobby Dickinson joined Mint Turbines in 1994, starting with teardown and cleaning before becoming our Senior Reduction Gearbox Technician. His work has taken him around the world, but these days you’ll usually find him doing what he enjoys most: working on gearboxes in the Mint shop.

Congratulations to our longest-tenured mechanic on 32 years, Bobby!

Mint Turbines is headed to Las Vegas for NBAA-BACE, October 20-21. We’re looking forward to connecting with the business...
10/08/2026

Mint Turbines is headed to Las Vegas for NBAA-BACE, October 20-21.

We’re looking forward to connecting with the business aviation community and talking with operators and partners about PT6 support, maintenance and what’s ahead for the industry.

See you in Vegas at the M International Booth, number 3962:

Step into the future of business aviation at the NBAA Business Aviation Convention & Exhibition (NBAA-BACE) – the most influential aviation event on the planet.

We’re proud to be part of the Oklahoma Aerospace Forum on October 8, right here in our home state.Oklahoma has a strong ...
10/07/2026

We’re proud to be part of the Oklahoma Aerospace Forum on October 8, right here in our home state.

Oklahoma has a strong aerospace community, and we are excited to connect with the people and organizations helping move the industry forward across the state.

See you in Oklahoma City:

Join the Aerospace community for the ninth annual Oklahoma Aerospace Forum, sponsored by Oklahoma ACES.

Proud to be based in Stroud, Oklahoma! Grateful for the hardworking Oklahomans behind this growth.
10/06/2026

Proud to be based in Stroud, Oklahoma! Grateful for the hardworking Oklahomans behind this growth.

Oklahoma’s aerospace and defense sector has grown by about 20% since 2017 — and leaders want it to overtake oil and gas as the largest industry in the state. FULL STORY⬇️

10/06/2026

Peak season is over. Now is the time to get your T700s ready for the next one.

Mint’s PMI2 / Power Recovery support helps operators address performance degradation during planned winter downtime - either in the field or at our shop.

Recover performance. Verify readiness. Be ready before fire season starts.

Schedule yours today: mintturbines.com/field-service or call us to schedule at 703-202-7160.

Monday, 9/21, we celebrated our designation as a Pratt & Whitney Canada Designated Overhaul Facility for PT6A and PT6T e...
09/24/2026

Monday, 9/21, we celebrated our designation as a Pratt & Whitney Canada Designated Overhaul Facility for PT6A and PT6T engines alongside partners, community leaders and members of Oklahoma’s aerospace community.

We were also honored to have Congressman Kevin Hern join us and speak about what this milestone means for Stroud and Oklahoma’s aerospace industry.

This designation is the result of the experience, hard work and commitment of the people behind Mint Turbines. It’s an exciting milestone, but it’s also just the next chapter in the Mint Turbines story.

Thank you to everyone who helped make the event such a success!

Congressman Kevin Hern
Stroud, OK Chamber of Commerce
Lincoln County News
KOTV - News On 6
RTX

The responsiveness of an independent shop, with the certifications of a major MRO.Our new Pratt & Whitney Canada designa...
09/24/2026

The responsiveness of an independent shop, with the certifications of a major MRO.

Our new Pratt & Whitney Canada designation joins a growing list of OEM relationships across the Mint Turbines family of companies, including General Electric, Ozark Aeroworks and Rolls-Royce through sister company Airborne Engines in Canada. These relationships reflect our overall commitment to maintaining the highest standards of safety, precision and performance for our customers worldwide.

For operators, especially fleets where downtime directly impacts the mission, access to OEM-authorized support matters. Our expanded capabilities provide another option for certified maintenance and overhaul while helping reduce unnecessary handoffs and delays.

And while our authorizations continue to grow, the way we work with our customers stays the same: responsive communication, direct access to our team and a focus on getting the job done right.

Thank you for your support!

Our goal is to make engine support as seamless as possible for our customers. The Pratt & Whitney Canada DOF designation...
09/23/2026

Our goal is to make engine support as seamless as possible for our customers.

The Pratt & Whitney Canada DOF designation adds another OEM authorization to our network and expands the certified services available to operators.

More capability in one place means fewer handoffs, greater confidence and a more streamlined path back to service.

09/17/2026

What does it mean to be authorized by Pratt & Whitney Canada?

For Mint Turbines, it means our facility, processes and documentation meet Pratt & Whitney Canada requirements for authorized engine support.

For our customers, it grants greater access to OEM-authorized maintenance and overhaul backed by the responsive service and direct communication they already know from Mint Turbines.

More capability. The same team you trust.

Learn more: www.mintturbines.com/engines/pt6-dof

Address

2915 N Highway 99
Stroud, OK
74079

Alerts

Be the first to know and let us send you an email when Mint Turbines LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Mint Turbines LLC:

Shortcuts

Share