CBR Performance & Automotive

CBR Performance & Automotive Dedicated to put out the best work. Shoot us a message on what you got and lets put something together.

Equipment, Custom or Dailey drivers, Racecars (NO PROBLEM). $100/Hr
Nitrous systems / tuning / turbo systems / custom swaps / LS swaps we do it all.

This unit was dropped off with a damaged track and worn sprocket that needed some attention before it could get back to ...
06/22/2026

This unit was dropped off with a damaged track and worn sprocket that needed some attention before it could get back to work.

✅ Disassembled the affected components
✅ Thoroughly cleaned the work area and mounting surfaces
✅ Removed the damaged parts
✅ Installed a brand-new sprocket
✅ Installed a new track
✅ Inspected everything and got it ready for service

Now it’s back together, operating properly, and ready to get back to doing what it was built to do! 💪

No matter if it’s maintenance, repairs, fabrication, or performance work, we take pride in doing the job right and getting our customers back up and running as quickly as possible.

Thanks for trusting us with the repair!

📩 Need repairs or upgrades? Send us a message and let’s get your equipment or project back in top shape.

🔥 Progress Update on the Malibu! 🔥We’ve been steadily chipping away at this Malibu and making some major improvements al...
06/22/2026

🔥 Progress Update on the Malibu! 🔥

We’ve been steadily chipping away at this Malibu and making some major improvements along the way!

✅ Installed a new front core support
✅ Added a 4-core aluminum radiator with fan and shroud setup
✅ Corrected brake issues left by the previous shop with all new brake lines and fittings, a proper disc/disc proportioning valve, and front Wilwood brakes

From there, we converted the transmission over to AN fittings and push-lock hose for the overflow system and added an overflow tank.

The engine received all new sensors and fresh spark plugs to ensure it’s ready for boost.

We also installed a sweet in-tank pump ice tank setup, ran all the necessary lines, and got the boost controller system in place with an onboard air setup utilizing dual MAC valves.

To finish up the transmission side, we installed a transmission cooler with custom-fabricated brackets and built custom AN lines for the cooler system.

One of the bigger fixes was correcting a transmission crossmember that had been welded in incorrectly by a previous shop. We cut it out, fabricated a new removable setup with welded mounting tabs, and got everything painted and looking right.

While working up front, we converted the steering to a manual rack—not only for a cleaner appearance but also to provide additional clearance for the custom turbo kit we’re building.

We also got the new Ho**er headers and PRP water pump installed.

Next up:
🔥 Finish the steering shaft
🔥 Fabricate the custom turbo kit
🔥 Build the exhaust system

This thing is coming together nicely, and we can’t wait to hear it make some boost! Stay tuned for more updates! 👊

We got Chris’s super clean RX-7 convertible looking even better with a fresh set of shoes and a few exterior upgrades! 😎...
06/22/2026

We got Chris’s super clean RX-7 convertible looking even better with a fresh set of shoes and a few exterior upgrades! 😎

✅ Installed a fresh set of wheels
✅ Refreshed a set of S5 taillights
✅ Applied a light tint to the taillights
✅ Tinted the front marker lenses for a clean, finished look

The results speak for themselves—subtle changes that completely transform the overall appearance while keeping that classic RX-7 style intact. 👌

A huge thanks to Chris for trusting Stylin Rydz Performance & Automotive with the project!

If you or someone you know is looking for:
🔹 Taillight restoration
🔹 Lens tinting
🔹 RX-7 upgrades
🔹 Custom automotive work

Don’t hesitate to reach out. We’d love to help bring your vision to life!

📩 Message us today and let’s make your ride stand out from the crowd.

We had this unit dropped off last week for a full check-over. After completing the initial inspection, the customer put ...
05/05/2026

We had this unit dropped off last week for a full check-over. After completing the initial inspection, the customer put it to work over the weekend and identified a few weak points that needed attention.

Since then, we’ve taken care of several issues. We repaired the loose track, secured the pins that were backing out, and addressed leaks in the hydraulic lines. We also fixed the hood latch, which had come apart.

Next, we’ll be completing a full engine oil and filter change, along with a hydraulic filter replacement and fluid flush to keep everything running smoothly.

Lastly, the exhaust that broke will be repaired — no problem for our team. 🫡

We’re making sure this unit goes back out stronger, tighter, and ready to perform. 💪

If you or anyone you know needs or wants this type of work done, don’t be afraid to hit us up!!!

This Malibu that got dropped is getting the works!!This will be a few months project but it will be mean and done right!...
05/05/2026

This Malibu that got dropped is getting the works!!

This will be a few months project but it will be mean and done right!!

We have torn the whole front end down and started from scratch!

This unit has gotten some bad to the bone parts installed as of new tubular control arms upper and lowers along with a brake line kit for the front and rear brakes.

We installed a new tubular support as the car will be getting a big turbo so room is much needed, we have installed a new driveshaft loop as well as front Viking coilovers and it’s getting front wilwood brakes to make the rears! We are just getting started on this and it will be one bad machine!

If you or anyone you know wants or needs this type of work done, don’t be afraid to hit us up!!!

This box Chevy is almost ready to hit the streets—just waiting on a few final parts to bring it all together.We’ve been ...
05/05/2026

This box Chevy is almost ready to hit the streets—just waiting on a few final parts to bring it all together.

We’ve been putting in serious work on this build, turning it into a clean, hard-hitting ride that sounds as good as it performs with that stage 2 cam.

When it first came in, it needed some attention. We pulled the engine and transmission to address torn motor and trans mounts, then upgraded it with a new stall converter to properly match the cam. While we were in there, we also took care of some transmission issues to make sure everything runs strong and smooth.

From there, we kept leveling it up:
• New U-joint installed in the driveshaft
• Fresh MSD ignition box—fully tuned in-house
• New starter installed
• Frame modified for proper header fitment

And we didn’t stop there… 💪

We added an accessory bracket kit, alternator, new fuel tank with fuel lines and sending unit, front brake lines, radiator hoses, and radiator support brackets. Custom transmission lines were built, and a new trans cooler was mounted up front for optimal performance.

To top it off, we wired the full ignition system, fuel pump, fans, and alternator setup—and tucked everything clean for that polished, professional finish.🤝

This one’s coming together exactly how it should: clean, reliable, and ready to turn heads while beating the pavement.🔥

If you or anyone you know wants or needs this type of work done, don’t be afraid to hit us up!!!

This Cadillac came to us from another shop with a recommendation for a full transmission replacement. Before moving forw...
05/05/2026

This Cadillac came to us from another shop with a recommendation for a full transmission replacement. Before moving forward, we performed a thorough diagnosis—and the results told a different story.

We discovered the transmission was extremely low on fluid due to a leak. After repairing the leak and restoring proper fluid levels, we turned our attention to another issue: the vehicle wouldn’t start. Our team replaced the fuel lines, installed a brand-new fuel pump, recharged the battery, and brought the engine back to life.

To ensure long-term reliability, we also addressed the charging system by installing a new alternator with a modern one-wire conversion. Along the way, we added new belts, spark plugs, plug wires, and a fresh air filter.

We finished things off with a complete oil and filter change—leaving this Cadillac running strong and ready to hit the road once again.

Another great example of why proper diagnosis matters. 🚗💪

If you or anyone you know wants or needs this type of work done, don’t be afraid to hit us up!!!

This little S10 rolled into the shop a couple weeks back needing some serious TLC to get back on the road—and we were ha...
05/05/2026

This little S10 rolled into the shop a couple weeks back needing some serious TLC to get back on the road—and we were happy to bring it back to life 🔧

We started with a full battery relocation, then stepped things up by installing a fuel cell, rear-mounted filter, and a Holley fuel pump. From there, we ran all new fuel lines, added a regulator, and set it up with a brand-new carburetor and mounting brackets for a clean, reliable fuel system.

Electrical got some attention too—we tracked down key switch power, wired up electric fans and the fuel pump to a custom switch setup (just how the customer wanted), and relocated the fuse box for a cleaner layout.

To wrap it up, we handled routine maintenance with fresh oil and a new filter—but not before tackling a failed starter with a brand-new replacement.

Now this S10 is running strong and ready for the road again 💪

If you you or anyone wants or needs this type of work done, don’t be afraid to hit us up!!!

If we did a run of hats who all would be interested?? We already have 6 presold so let us know if you want one and we ca...
05/01/2026

If we did a run of hats who all would be interested??

We already have 6 presold so let us know if you want one and we can put you down!

Cost would be $25 since it’s such a small batch!

They will be flexfit L/XL fit with a semi curve bill, supper comfy and premium material!

Address

15694 Us-11
Coaling, AL
35453

Telephone

+12054541949

Website

Alerts

Be the first to know and let us send you an email when CBR Performance & Automotive posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CBR Performance & Automotive:

Shortcuts

Share