Next Level Appliance Solutions

03/24/2025

This LG Studio slide-in range wasn’t getting any heat in the oven. We found the igniter was no longer functioning correctly. After replacing with a new igniter we got the nice blue flames and oven is ready to bake again!

03/05/2025

For a limited time…

03/04/2025

Another dishwasher installation completed in Winston Salem!

This nice LG replaced and older Frigidaire. This installation had some challenges with the flooring, electrical and plumbing, but we got it done!

These are the ones that your big box store installers will walk away from…

02/28/2025

Front load washers are great for large loads and large items. However, due to the design they are much more likely to buildup residue and mildew in and around the rubber gasket. If you haven’t kept up with running tub clean cycles or if your washer is several years old there maybe a buildup in unseen places causing an unpleasant odor. This odor can be frustrating if it gets in your clothes you are trying to clean!

You can try any of the numerous products to combat this or try running a few clean cycles with bleach or vinegar. If the odor still persists then you may need the gasket removed to be cleaned or replaced to get rid of the odor.

When we replace a rubber gasket we also wipe down the front of tub and all accessible areas to get rid of as much of the odor causing residue as possible, so you can start new again.

If you have any questions regarding this, feel free to reach out!

02/26/2025

We received a call from a customer who had an issue with another servicer not completing a repair on their dishwasher. They took a couple weeks to order and come back to install a motor but then left in a hurry without testing anything. Customer said when they tried using it there was water coming out from under the dishwasher and the “new” motor didn’t work.

We found numerous parts not put back correctly, some internal wiring left unplugged, and the most concerning; the main hose that sends the water pressure throughout the dishwasher was not clamped, instead they just tried gluing it which caused the leak (see attached video).

We were able to install the specific clamp and correct everything to get the dishwasher back in working order.

02/22/2025

Electrical supply to the dishwasher stuck in the dishwasher door spring.

Luckily, we were able to find this during our checks after a repair of a broken dishwasher door latch.
Who knows how many more times of the door being opened and closed would have caused the spring to rub into the wire. Those two wires are supplying 120 volts to the dishwasher! ⚡️⚡️⚡️

Installations should be done by an appliance professional to avoid these mistakes.

04/03/2024

05/19/2022

We are here to serve our neighbors in the Winston Salem and surrounding areas. Call us today with your questions! We would love to talk to you!

05/19/2022

Here are some of the Brands we service!

05/17/2022