10/18/2018
Full kit with all electrics at its highest end with no battery is 295 Grams Base 70 Grams
We try to fit both worlds with one unique design. Our current stack set is down to 12 to 13mm for the lowest profile on this build yet space forgiving for any receiver and vtx. Top, bottom or saddle concept battery design placement allowing many optional configurations with this kit. Light, durable and easy to repair in the field. Various arm lengths will be available as well as degrees of angel. Our frame comes with all of the TPU parts you have come to need and want and we add more than just 1 set for replacement needs because we know your going to rock this frame hard. This frame is currently available and ready to ship and (if we run out of stock Back-orders will be available the following 4 days or less) get your self a FATALG DUSTER and mug your competition.
DUSTER 5 INCH TEAM RACER spotted at a local event
DUSTER 5 inch and 6 inch mini quad.
DALRC engine and FC combo. sets the top plate at 15mm. Note the carbon fiber strap spacer.
THE GREAT THINGS WE HAVE ADDED!
-Fits common 2 stack and 3 Stack setups. ESC and FC. DALRC Engine shown. you can add any size spacer to give your top plate a lift. I added 4 extra spacers for the Emax Micro 2 Stack.
-Fits common receivers. FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus Shown
-Fits standard VTX AKK X2M / X2 X2 ultimate, TBS Crossfire, 5.8Ghz 0.01mW/25mW/200mW/500mW/800mW Switchable FPV Transmitter with MMCX Compatible
-Fits 20mm cameras down to micro as shown with now extra parts needed.
Stepping off from the standard 220mm FATALG we have designed a lighter more agile frame hat fits acro and racing needs. The arms do not sit on the stack so no movement of the flight stack is required to change an arm. The arms can be made in a variety of lengths and sizes giving another advantage of tuning. We will also have arms that will turn the VITO into a 6inch frame. The frame includes 12 screws, 4 nuts, 4 posts, front TPU camera mount, Rear VTX mount, TPU motor soft-mounting, bottom Flight controller and esc plate, battery strap and lower point receiver mount and Crossfire arm option. The team version will have an optional TPU racing hood. All edges are hand sanded and sealed with a special rubberized epoxy in white.
70 grams of pownage!
Kit Comes with everything you see. Included extra in some kits decals, and extra parts. base frame is 70 grams
Kit Materials
1 bottom plate
1 top plate
4 arms
8 titanium bottom screws
4 aluminum top plate screws
4 aluminum lock nuts
4 aluminum stand offs 15mm or X4 20mm spacers Emax 2 Mini Mag and more.
1 rear pod print
2 front cam print post studs any size fpv camera
4 soft mounts
1 tbs crossfire arm mount
1 battery strap
1 battery carbon plate no slip setup
2 rubber foam pads
2 antenna tube
1 PRINTED GOPRO MOUNT
