Paltech

30/06/2016

Paltech offers Advanced Valve Technology and manufactures high-performance Butterfly Valves, Flanged Diaphragm non-return valves and Foot Valves.

Paltech markets the Posi-flate range of inflatable seated butterfly valves, in Southern Africa, under an exclusive license.

At Paltech we develop innovative and high-quality valves for various applications that cater to a variety of industries such as oil, gas, petrochemicals, power, slurry, alumina, waste water, paper and pulp. Ongoing research and development of a unique design of butterfly valve, capable of handling higher pressures and temperatures and more aggressive process conditions than conventional butterfly valves, has earned us our reputation for technical excellence in the valve industry.

Paltech also manufacturers customised butterfly valves for unique industrial applications. Quality and service is what Paltech strives to provide to you, the customer.

Visist our website for more information:
http://www.paltech.co.za/

29/06/2016

Single Eccentric T-Bar Butterfly Valve

Selling points of Paltech S.E. & D.E. HP Butterfly Valves vs. conventional rubber lined Butterfly Valves (Resilient Seated)

Customer Benefits

Larger bore, superior free flow area – less presure drop – Resilient seated Butterfly Valves higher pressure drops.
Low break and closing torque due to thermo-plastic materials –Resilient liners can swell causing severe friction – can tear and scuff.
50 bar pressure can be achieved with the T pressure seal – Rubber liners are limited to 16 bar.
Smaller actuators can be used on higher pressures – above average size actuators must be utilized for rubber lined Butterfly Valves.
Paltech HP Butterfly Valves are suitable for temperature up to 500°C – Resilient seated Butterfly Valves temperature limitation ±200°C.
Low maintenance costs ±25% of the cost of a new liner-Resilient seated Butterfly Valves maintenance cost absorbent.
Positive disc drive – no pins, fasteners or difficult splined shaft connections.

For more information visit our website:
http://www.paltech.co.za/

27/06/2016

Choosing the right valve you need to know exactly what valve activity is required.

On/off or regulating or other duty.
The fluid to be handled.
Maximum working pressure.
Maximum operating temperature.
Valve size.
End connection.

For more information visit our website:
http://www.paltech.co.za/

24/06/2016

Flanged Non-Return Valve

COMPARATIVE WATER HAMMER EFFECT

Water hammer detected downstream of a valve, when a pump stops suddenly.
Po: Initial pressure

For more information visit our website:
http://www.paltech.co.za/

22/06/2016

Flanged Non-Return Valve Featuring:

Quiet operation
Water hammer minimised
Extremely reliable
Adapts to fluctuations in flow rates
No mechanical moving parts
Drop tight sealing.

A Flanged Non-Return Valve is a flexible membrane that changes shape under flow conditions progressively opening and closing – Excellent for variable and pulsating flow Conditions.

Featuring
For more information visit our website:
http://www.paltech.co.za/

20/06/2016

Valves have a primary and secondary rating. The most important or primary rating is cast, forged or stamped on the valve body.

The primary rating in these standards is the cold rating e.g. PN32 cast on a bronze valve means maximum 32 bar pressure at a temperature of -10°C to +100°C.

With every primary/cold rating there is a corresponding secondary/hot rating. Thus, the above temperature rises to maximum allowable working pressure decreases.

For more information visit our website:
http://www.paltech.co.za/

19/06/2016

To all the Fathers, HAPPY FATHERS DAY!

16/06/2016

15/06/2016

Footvalve:

Fig FV16
Body
Centre Plate
Diaghragm
Strainer
Ends

1 600 KPa
Cast Iron
Mild Steel
(BS 4360 Grad 43A)
EPDM
Perforated Steel Plate
Flanged
(50mm upwards)

For more information visit our website:
http://www.paltech.co.za/

13/06/2016

Biax Valve:

A new generation of Biax double eccentric Butterfly Valves.

On going research and development of a unique design of butterfly valve, capable of handling higher pressures and temperatures and more aggressive process conditions than conventional butterfly valves.

An ideal substitute for ball and plug valves.

For more information visit our website:
http://www.paltech.co.za/

10/06/2016

Single Eccentric T-Bar Butterfly Valve

Ten reasons why engineers and specifiers select ‘PALTECH’ Butterfly Valves for high performance applications.

Exclusive, patented angular seat and disc design, offset to the body centerline, presents no interference with the shafts; both disc and integral body seat are perfectly spherical.
Absolute shut off by means of a T-Seal (thermoplastic) and an o’ring (elastomer) fixed to the disc groove periphery. This allows for wide seat/seal selection and low cost simple replacement ability.
Exceptionally low operating torque as the unique disc seal is not reliant to wedging or distorting actions for closure. Smaller size actuating devises can thus be utilized.
High strength drive and support shafts to disc convection. No pins, keyways or fasteners to loosen or corrode in service. Assemble and dismantling of the valve is simple.
Self-aligning disc. Seating on a high precision machined seat, integral to the body has a prior to closure wiping action. The angular seat prevents solids build-ups. This combination leads to extended seat life.
‘Paltech’ Butterfly Valves offer compactness, low headroom as well as a light weight design.
‘Paltech’ Butterfly Valves are equipped with a pressure energized sealing system that offer higher pressures and better sealing abilities (Class VI – Bubble tight)
Due to the wide range of exotic alloys available, ‘Paltech’ Butterfly Valve materials of construction can be predicted for optimum performance for prolonged valve life.
Availability – short lead times.
‘Paltech’ Butterfly Valves are 100% South African manufactured with South African products by South Africans

For more information visit our website:
http://www.paltech.co.za/

08/06/2016

Valves are widely used in industry for isolation and regulation of fluid in pipelines.
They can be categorized in two types.

Linear Valves of which the closure device moves in a straight line into it’s seating area and across(at right angle to) the direction of the flow and Rotary valves.

Rotary valves (quarter turn) of which the closure device rotates about the axis at right angles to the direction of the flow and, in the open position either the flow passes through or around it.

For more information visit our website:
http://www.paltech.co.za/