ABOUT US
Welcome to PCB Power Transformers
We manufacture a wide variety of products such as:
Mini-Sub Stations with SF6 & Oil RMU’s Distribution
Transformers with the SANS 780 Mark
1 & 3 Phase Transformers from 1VA to 1.6MVA
Neutral Earthing Resistors
Low Voltage Lighting Transformers
Fluorescent Ballasts, Chokes & Light Fittings
PCB Power Transformers design and manufacture air and oil cooled
transformers from 1VA to 1.6MVA. We manufacture Distribution Transformers which carry the SANS 780 Mark & Mini-Sub Stations with Oil or SF6 RMU’s
Other products include Resistors, Coils, Fluorescent Ballasts & Chokes, Light Fittings, Current Transformers, Distribution boxes for the swimming pool industry, AC & DC chokes (Reactors) and Printed Circuit Board (PCB) transformers. Our Fabrication shop produces tanks and enclosures for our larger transformers. Although we have standard ranges most products are designed and built to suit the customer’s requirements. We pride ourselves in delivering quality service and products, our professional and friendly staff are available to assist you with any query you may have. PCB Power Transformers
Head Office
Tel: +27 11 474 4073
Fax: +27 11 474 8353
19 Bunsen Street, Industria,
Gauteng, South Africa
www.pcbpower.co.za
[email protected]
INTRODUCTION
PCB Power Transformers was established in 1989, and is wholly owned by a female HDI. PCB Power Transformers has grown from strength to strength to become a sustainable HDI owned electrical manufacturing company which aspires to grow and be recognized as a role player in the electrical manufacturing field. OBJECTIVES
The main objectives of PCB Power Transformers are to:
Identify business opportunities in all market sectors and to tender for such. To grow as a small/medium emerging business. To provide exemplary workmanship through continual staff training and up-liftment. INFRASTRUCTURE
PCB Power Transformers owns a 4000 m2 factory situated in Industria, Gauteng. It contains all the facilities necessary to build and test new transformers to customers’ specifications. VEHICLES
We currently have 6 vehicles ( from 1/2 ton to 6 ton) that service the Gauteng region on a daily basis. EQUIPMENT
We have a large number of winding machines to cater for the full range of transformers we produce. These range from fully automatic programmable machines to those capable of winding heavy copper foil. The Steel fabrication section has a 3 meter x 6mm guillotine, 100 Ton press brake, large radial arm drill, welding bays and a spray booth enabling us to produce tanks in-house. The press shop has five eccentric presses for stamping laminations and steel cans, as well as spot welding equipment. Our test bay contains all the instruments required to perform routine tests according to SANS 780 (including an automatic Ratiometer, Tinsley dual channel Resistance Bridge and Norma power analyser). We are also able to perform in-house temperature rise (heat run) tests according to SANS 780 type test requirements. TRANSFORMER / ELECTRICAL EXPERIENCE
Our forte is manufacturing specialised transformers. We manufacture a range of single and three phase Transformers, Current Transformers, PCB
Transformers, Chokes, Low Voltage Lighting Transformers and Ballasts. We manufacture Mini-Sub Stations with Oil and SF6 Switchgear. We also cater for the Mining industry by manufacturing general purpose and lighting oil cooled
transformers. Transformers in this range are: 1VA to 1600 kVA, single and three phase, air or oil cooled. We are a major manufacturer of Distribution Boards for the Swimming Pool and Spa industry. Laminations and cores are punched / cut in-house from imported steel. Our Metal section produces transformer tanks, enclosures and cans for our lighting products. We produce lighting chokes for Tridonic South Africa. K**a Coils manufacturing was taken over in 2011, this includes Resistors, Coils and NER’s.
