Twinstar Precast

Call Directions Website Contact the business

Twinstar Precast Twinstar Precast provides special Precast Products which is not available as a standard on the market Quality & timely delivery are the soul of our business.

Are those precast concrete products which are specified on your construction plans giving you sleepless nights because you just can’t find a supplier?

Twinstar Precast will manufacture any Precast Concrete Product to your design and need.

We specialize in the manufacture of precast concrete products which are not already available on the market, even once-off items. We aim to solve precast problems specifically in the Civil Construction environment at affordable prices in a very short time.
24 years of experience make it possible to provide expert advice and assist with the design of your product.

Contact us at [email protected]
If you need it in concrete, we can make it.

02/11/2026

False. Strength is about load. Lasting is about the cover over the steel and how well the concrete keeps water out. You need both.

| |

26/10/2026

False. 28 days is when strength is tested, not when it switches on.

Between 50% - 75% of it is there in the first week.

| |

19/10/2026

False. It cures through a reaction with water. Dry it out too fast and you lose strength.

"That's why our products are cured under controlled conditions before they reach your site."

| |

12/10/2026

False. Cement is the glue. Concrete is cement, water, sand and stone mixed together. So it's a concrete slab, not a cement slab.

| | |

The summer storm season is starting. A blocked or broken channel usually shows itself in the first heavy downpour: flood...
01/10/2026

The summer storm season is starting. A blocked or broken channel usually shows itself in the first heavy downpour: flooded parking, water at the doors, or a trip hazard where a grating has gone missing. A walk-round now costs far less than repairing water damage later.

Five checks for facility and estate managers, worth doing between storms:
1. Clear every channel of silt, litter and debris.
2. Look for missing or loose gratings and covers. They’re a safety hazard as well as a drainage gap.
3. Check for cracked or displaced channel sections and open joints.
4. Make sure inlets and outlets run clear all the way through, not just at the surface.
5. After the first heavy storm, note where water pooled. That’s where your system needs repair or extra capacity.

If a slab, kerb inlet or channel section needs replacing, Twinstar Precast can cast units to suit older installations, including custom slabs and channels in non-standard sizes. Talk to our team to find the best solution for your site.

• • • •

The summer storm season is starting. A blocked or broken channel usually shows itself in the first heavy downpour: flood...
01/10/2026

The summer storm season is starting. A blocked or broken channel usually shows itself in the first heavy downpour: flooded parking, water at the doors, or a trip hazard where a grating has gone missing. A walk-round now costs far less than repairing water damage later.

Five checks for facility and estate managers, worth doing between storms:
1. Clear every channel of silt, litter and debris.
2. Look for missing or loose gratings and covers. They're a safety hazard as well as a drainage gap.
3. Check for cracked or displaced channel sections and open joints.
4. Make sure inlets and outlets run clear all the way through, not just at the surface.
5. After the first heavy storm, note where water pooled. That's where your system needs repair or extra capacity.

If a slab, kerb inlet or channel section needs replacing, Twinstar Precast can cast units to suit older installations, including custom slabs and channels in non-standard sizes. Talk to our team to find the best solution for your site.

• • • •

30/09/2026

Four different profiles, four different applications
Twinstar Precast casts four standard stormwater channel profiles, each designed to suit a different application. The profile follows the flow, the site and whether the channels will carry vehicle traffic.

For surface water run-off half round channels are best suited for the job. V-drains are ideal for shallow surface drainage. Equal leg U-Channels provide more capacity and can be placed open or covered with either dog bones or grids whilst taper chute channels are best for guiding water down slopes or embankments.

Not sure which is the best fit for your site contact our team for advice and a quote.

· · · ·

South Africa’s summer rainfall season starts now. Whilst the seasonal outlook points to below-average rainfall driven by...
28/09/2026

South Africa’s summer rainfall season starts now. Whilst the seasonal outlook points to below-average rainfall driven by a strong El Niño, severe thunderstorms will test your stormwater drainage system to its limits.

Your system should be designed to carry the volume of one intense storm and not the seasonal average, a dry season with one severe thunderstorm is all it takes to see whether your system will stand up to the challenge.

As the first rains of the season start watch your system and see where water forms pools or overflows your stormwater drains then contact our team to discuss the best solution for your situation.

Twinstar Precast manufactures a range of stormwater drainage channels with a profile and duty class for every application.

· · · ·

A question for anyone manufacturing transformers, mini substations, or generator sets: What’s under your product when it...
10/09/2026

A question for anyone manufacturing transformers, mini substations, or generator sets: What’s under your product when it leaves your factory?

The plinth is the one component your customer never asks about — until it cracks, isn’t level or the cable entries don’t line up on site. Then it’s your name on the callback, not the concrete supplier’s.

Twinstar Precast manufactures a range of standardised electrical plinths to the manufacturer’s specification and holds that specification across every plinth.

Cable knockouts correctly placed to spec, lifting hooks placed to your specific requirements every time.

For OEM electrical products that’s the reason to recommend one precast partner as standard rather than sourcing ad hoc: the foundation stops being a variable. You build the electrical product; we cast the plinth to your specific requirements.

Have a new product that doesn’t fit the existing “standardised” plinths talk to our team for a custom solution.

If you manufacture electrical infrastructure and want to standardise the precast under it, let’s talk.

• •

Address

Unit 21, Hunky Dory Business Park, 9 Goedehoop Avenue (M57, Marwyn AH)
Olifantsfontein
1665

Opening Hours

Monday 07:30 - 17:00
Tuesday 07:30 - 17:00
Wednesday 07:30 - 17:00
Thursday 07:30 - 17:00
Friday 07:30 - 17:00

Telephone

+27126709083

Alerts

Be the first to know and let us send you an email when Twinstar Precast posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Twinstar Precast:

Shortcuts

Share

Nearby businesses