Air Receiver Testing Australia

11/07/2022

Keep a look out for common problems that occur with air receiver tanks:
- Compressor vibration can cause cracks in the leg welds of a receiver that is bolted to concrete and other hard surfaces.
- Damage caused by rigid piping that does not have enough space for vibration.
- External damage caused by vehicles or machinery coming into contact with the receiver.
- Internal corrosion caused by a build up of condensate or liquid.

Keeping up to date with your air receivers inspection schedule can help ensure these problems are kept at bay; if not they can pose significant danger in the workplace.

Reach out to our team to ensure safety and compliance.

       

17/08/2021

our dedicated team are committed to providing exceptional service both on the field and behind the scenes.
STREAMLINED | EFFICIENT | ENGAGING

-2006 &S

12/08/2021

Since opening our doors, we’ve been committed to providing service of the highest quality, paying particular attention to working efficiently while keeping the lines of communication with our clients clear and concise.
Our mission at Air Receiver Testing is simple: to provide high-quality services in a timely manner, with peoples safety our primary concern. Our team caters to each project’s specific needs to ensure excellence. We hope you’ll find what you’re looking for. For more information or general inquiries, feel free to get in touch today.

-2006 &S

10/08/2021

Our values at Air Receiver Testing Australia: LOYALTY | EFFICIENCY | SAFETY | QUALITY

-2006 &S

05/08/2021

Internal Inspections are required every four (4) years from date of commissioning.
-2006 &S

03/08/2021

Our family owned and operated business has been assisting small and large businesses to ensure your Air Receivers' are compliant to AS 3788-2006 and relevant standards as you are required to provide and maintain safe working equipment for your employees.
-2006 &S

29/07/2021

WE ARE LEADING THE WAY FOR A SAFE WORK PLACE.

-2006 &S

27/07/2021

We work with our customers to ensure minimum to no interruption to your production requirements. Our team will work with you to provide the best outcome in achieving this.
-2006 &S

22/07/2021

Plant registration...

WHAT?
All pressure vessels rated hazard level A,B or C and greater than 14 litres capacity.

HOW OFTEN?
All plant must be renewed yearly prior to January 31st for any previously registered plant.
All new plant registrations can are mandatory from time of commissioning.
Plant registrations come with Certificate of compliance .
For any further information please refer Worksafe QLD website!

-2006 &S

20/07/2021

We pride ourselves on being customer focused - which means we will always aim to minimise interference with your production whilst we are onsite! Contact us to find out more about how we conduct Pressure Vessel Inspection, or visit our website at https://buff.ly/3wM3ier
-2006 &S

Fully Qualfiied in Testing & Certifying Pressure Vessels/Air Receiver in conformance to Work Safe in Queensland and NSW in conformance to AS3788-2006.