Geology of the world and the Environment

Itinéraire Site Web Contacter l'entreprise

Geology of the world and the Environment Discover the World's Geology

. https://geologyoftheworld.com

But finding the (best) resources is not always easy.

(475)

our website provide an enjoyable and Free knowledge about regional geology, geological history, rocks, and tectonic structures of different regions..

our Page provide an enjoyable and Free knowledge about Regional Geology , Regional geology deals with the geological history, the rocks and the tectonic structures of individual regions of the world. Scales vary and "regions" may include whole continents, countries, or smaller parts of a country. Many geologists work in more than one "region", partly because they deliberateley expand their investigations to other regions because of pure interest, but partly also because the job makes it necessary to cover larger parts of the world. Also hobby geologists and nature lovers will often direct their holidays to different regions of teh world to sample a wider range of geological provinces and phenomena.

When starting any geological task in a new region, the first step must always be to try and understand the regional geology of that area. For many regions excellent textbooks exist; superb overview papers in journals help to understand the main geological developments; useful websites can be found on the internet that give a good introduction; videos on DVD explain the geology and the resulting landscapes in userfriendly multimedia formats; excursions are being offered that allow intense, hands-on experiences in the field.

Often valuable resources are overlooked. This site (Geology of the world and the environment) aims to give a comprehensive overview of regional geology resources. To give you a jump start in your new projects

Come here to discovery Geology of the world and the Environment ( Geology of the world and the Environment )

Instagram : https://instagram.com/geologyoftheworld

Telegram : https://t.me/GeologyServices

LinkedIn : https://www.linkedin.com/company/geology-of-the-world

Twitter : https://twitter.com/Geologyhelp

Layered Shale and Slate Cliffs, Small Point-Adams Cove, Newfoundland, CanadaThese are the heavily layered shale and slat...
10/11/2026

Layered Shale and Slate Cliffs, Small Point-Adams Cove, Newfoundland, Canada

These are the heavily layered shale and slate cliffs located at Small Point-Adams Cove in Newfoundland, Canada.

These thinly bedded sheets were originally deposited horizontally as soft mud and clay over millions of years. The intense forces of plate tectonics buckled the earth, shifting these once-flat beds into a near-vertical alignment.

The shale cliffs are sedimentary formations known for their “fissility,” or the ability to split into thin layers.

Geological Fact:

When shale undergoes low-grade metamorphism, it can transform into slate. During this process, microscopic minerals such as chlorite and white mica develop a preferred orientation, forming a new planar structure known as slaty cleavage. This cleavage may cut across the original sedimentary bedding, revealing the effects of tectonic compression and metamorphism.

Reference:

Ingram, R. L. (1953). Fissility of Mudrocks. Geological Society of America Bulletin, 64(8), 869–878.

https://doi.org/10.1130/0016-7606(1953)64[869:FOM]2.0.CO;2

As geologists, we have to travel a lot ✈🚄⛵, visit different places 🏝🗻🌋⛰🛤, and study interesting geological features arou...
29/10/2026

As geologists, we have to travel a lot ✈🚄⛵, visit different places 🏝🗻🌋⛰🛤, and study interesting geological features around the globe 😍😘. I would say that is the sole reason behind learning geology—to experience the natural wonders on Earth. 🗺🌎
Let's travel the world together with the "Geology of the World and Environment" page! ✌😉
For more information about these pictures, visit this album ==> https://www.facebook.com/pg/GeologyHere.Environment/photos/?tab=album&album_id=1234936089870623

Avatar Hallelujah Mountain ( 阿凡达-哈利路亚山 ) ❤ |       Avatar Hallelujah Mountain is a mountain, a 1,080-metre (3,540 ft) qu...
20/10/2026

Avatar Hallelujah Mountain ( 阿凡达-哈利路亚山 ) ❤ |

Avatar Hallelujah Mountain is a mountain, a 1,080-metre (3,540 ft) quartz-sandstone pillar, located in the Zhangjiajie National Forest Park, in the Wulingyuan Area, in northwestern Hunan Province, China, They are the result of many years of physical, rather than chemical, erosion. Much of the weathering which forms these pillars are the result of expanding ice in the winter and the plants which grow on them. The weather is moist year round, and as a result, the foliage is very dense. The weathered material is carried away primarily by streams. These formations are a distinct hallmark of Chinese landscape.

Avatar Hallelujah Mountain ( 阿凡达-哈利路亚山 ) ❤ |

Avatar Hallelujah Mountain is a mountain, a 1,080-metre (3,540 ft) quartz-sandstone pillar, located in the Zhangjiajie National Forest Park, in the Wulingyuan Area, in northwestern Hunan Province, China, They are the result of many years of physical, rather than chemical, erosion. Much of the weathering which forms these pillars are the result of expanding ice in the winter and the plants which grow on them. The weather is moist year round, and as a result, the foliage is very dense. The weathered material is carried away primarily by streams. These formations are a distinct hallmark of Chinese landscape.

here and

Let’s get to know our community!I’d like to know who follows “Geology of the World and the Environment” 😊Which of these ...
18/10/2026

Let’s get to know our community!
I’d like to know who follows “Geology of the World and the Environment” 😊
Which of these best describes you?
1️⃣ Geologist
2️⃣ Geology student
3️⃣ Geology professor
4️⃣ Other
Thank you for participating! 😊
#جيولوجيا

WRITING A GREAT GEOLOGICAL REPORT 😉1. Abstract  2. Introduction  3. Stratigraphy and Lithology   4. Structures  5. Geolo...
01/10/2026

WRITING A GREAT GEOLOGICAL REPORT 😉

1. Abstract
2. Introduction
3. Stratigraphy and Lithology
4. Structures
5. Geological History
6. Conclusions
7. References.

1. Abstract
The abstract should be a stand- alone, informative summary of observations and interpretations. The abstract must be brief but must include:
1.where is the investigated area

2.which type of work has been carried out (e.g. field mapping, sampling, geophysical survey, drilling etc.),

3.what is the goal of the work (e.g. establishing the stratigraphic sequence, dating formations, recognizing structures, finding ore minerals etc.),

4.what are the results obtained (e.g. completion of a geological map and stratigraphic columns).

2. Introduction
The Introduction gives the extended information on why ?, where ?, how ? and what ? Write this section for an experienced geologist who does not know the region.
1.why is the work done?

2.where exactly is the area located? (both the geological and geographic location e.g. Rouchel is in the north-west region of the Hunter Valley, NSW but geological sits within the Rouchel Block of the Tamworth Belt in the south-easterly end of the New England Orogen)

3.how has the work been done? (field mapping, what measurements were taken)

4.what has been achieved? (creation of a geological map, mention the number of plates accompanying the report)

5.explain the general plan of the report? (contains the description of the stratigraphy, structures and they are both used to reconstruct the geological evolution of the area during a certain time interval)

3. Stratigraphy and Lithology
This is where you demonstrate the quality and accuracy of your field work and observations. The stratigraphy and lithology section combines all your field observations and interpretations. Remember this section is not a diary of visited outcrops, a list of what you have done, or a written description of the map.

The description of lithology must proceed from the oldest to the youngest. It should be accompanied by a stratigraphic column and appropriate field sketches and photos of specimens and outcrops. Refer to your map whenever possible to locate outcrops and samples.

When describing rock units, always state where they located in outcrops and the best locality for exposure and sampling (include relevant figures). You may refer to your geological map and a table (appendix) with the list of visited outcrops.

As a general rule remember to give the following information:

Basement terranes
1.Type of terrane (metamorphic / sedimentary / igneous)

2.Lithology (rock type) and name of rock unit (for metamorphic rocks also mention the parent rock (sedimentary or igneous) and the metamorphic grade)
3.Rock petrography (coarse/fine grained, mineralogy etc.)

4.Thickness of the unit (if known)

5.Age of the parent rock and age of the metamorphic imprint

Sedimentary units
1.Basal boundary of the unit (is it visible, is it an unconformity, is it a fault).

2.Lithology (including grain size, type of clasts, mineralogy of grains etc).

3.Classify the rock (claystone, mudstone, limestone, sandstone etc.) and give the name of the rock unit.

4.Type of bedding (massive, well bedded, alternating beds etc) and thickness of individual beds

5.Facies and depositional environment - terrestrial (fluvial, lacustrine) or marine (shallow, deep)
6.Fossil content and age of unit

7.Thickness of entire unit (you may also calculate this from your cross sections)

Igneous units
1.Lithology, mineral content, texture, rock type

2.Igneous facies (flow, d**e, sill) and contact with the surrounding rock units

3.Thickness

4.Age

4. Structures
First define if the area is strongly or mildly deformed (is the bedding horizontal, dipping or vertical?) and if the structures have been formed in a compressional or extensional regime, or if there is a transition from one to the other through time. Clearly separate ductile structures (foliation, schistosity and folds in the metamorphic units) from brittle structures in the sedimentary and volcanic units (joints, faults and folds).

Start with the oldest structures and work through to the youngest structures. Always include relevant sketches, stereonets and photos as well as referring to maps and cross sections.

Description of folds must include:
1.Geometry of the folded layer and fold morphology (syncline, anticline)

2.Fold dimensions (wavelength, amplitude)

3.Orientation and dip of axial plane and trend and plunge of the fold hinge line

4.Evidence for superposed folding (typically in metamorphic rocks)

5.Age

Description of faults must include:
1.Fault dimensions (at least length as mapped at the surface)

2.Strike, dip direction and angle of dip of fault surface

3.Rake of striations (if present)

4.Sense of movement (normal, reverse, dextral, sinistral or oblique)

5.Are there systems of faults? (parallel sets, conjugate sets)

6.Displacement of geological markers and amount of offset

7.Age (define crosscutting relationships between structures of different age)

5. Geological History
The geological history is a brief history of the evolution of your investigated area through time, as inferred from your field evidence. Always describe the evolution from the oldest event to the youngest event.
1.Start with the basement rocks, defining the time of deposition, metamorphic conditions and time of metamorphism.

2.Use presence, age and duration of unconformities to separate distinct cycles within the main stratigraphy sequence.

3.Is the sequence terrestrial or marine? Is there a transition from terrestrial to marine conditions? Is the marine sequence shallowing or deepening upwards?

4.Are there unconformities within the sequence?

5.Are there igneous events that interrupt the sedimentary sequence? What is their age?

6.What is the age of the youngest sediments preserved in outcrop?

7.When was the area uplifted?

8.When were the units deformed?

6. Conclusions
A brief summary of everything that the work has achieved (production of a geological map, cross sections and stratigraphic columns, discovery of new outcrops or fossil localities, construction of the geological history)

7. References
All publications used in the text should be noted in a list of references at the end of the report

📝

Pillow Lavas Wadi Jizzi. Oman |     ☺ In the Hajar Mountains of Oman, pillow lavas occur in what geologists call the Sem...
30/09/2026

Pillow Lavas Wadi Jizzi. Oman | ☺

In the Hajar Mountains of Oman, pillow lavas occur in what geologists call the Semail Ophiolite — a large slab of the oceanic crust and the underlying upper mantle that was uplifted and exposed above the sea level. Covering an area of approximately 100,000 square km, it is the largest and best exposed of its kind in the world.

Pillow Lavas found in the Hajar Mountains of Oman. Pillow lavas form when hot lava flows into water and cools rapidly forming a skin over the still molten rock. Underneath the skin, lava continues to flow forming a lobe, until the pressure of the magma becomes sufficient to rupture the skin and start the formation of a new lobe. This process produces a series of interconnecting pillow-shaped mounds of rock that look like toothpaste squeezed from a tube. Pillow lavas are found not only in the ocean but also under glaciers that overlie volcanoes. The presence of pillow lavas indicate that the area was once under water.

the beauty of the desert      geologis
19/06/2026

the beauty of the desert

geologis

19/04/2026

It’s been a while! Sending a quick hello to everyone here at 'Geology of the World and the Environment'. Hope you’re all doing great! 🌍✨

01/01/2026

Happy New year to all geology friend

Adresse

Bab El Oued
Algiers
16008

Notifications

Soyez le premier à savoir et laissez-nous vous envoyer un courriel lorsque Geology of the world and the Environment publie des nouvelles et des promotions. Votre adresse e-mail ne sera pas utilisée à d'autres fins, et vous pouvez vous désabonner à tout moment.

Contacter L'entreprise

Envoyer un message à Geology of the world and the Environment:

Raccourcis

Partager

Entreprises à proximité