Psycle Workz

29/10/2026

New on our site: the full MAXX ECU range. 🔧

MaxxECU is the world's most advanced standalone engine management system, precision-engineered in Sweden for professional tuners and racers, and we now stock and supply the full line-up: GEN2 RACE, GEN2 TRACK, PRO, RACE, SPORT, STREET and MINI ignition systems, from £555.

It slots straight into what we already do. We run in-house ECU remapping on our rolling road dyno, we build our Pro Stock Suzuki with race-proven electronics, and as 2022 FIM Pro Stock Champions we know what engine control has to survive.

Whether it's a street bike needing a clean remap or a race build running 4.5 bar of boost, we can supply the unit and support the tune.

Browse the range on our site, or call 01733 248500 to talk through your engine and what you want out of it.

27/10/2026

Your GSX1100's ignition cover sits right where the road throws everything at it. Ours is machined to take it.

Our Suzuki GSX 1100 EF / EFE / ET billet ignition cover is CNC-machined in-house at our Yaxley, Peterborough workshop, with a sleek, sloped and lightweight design that protects the ignition assembly.

It comes out of the same shop that builds our Pro Stock Suzuki, and we're proud to be 2022 FIM Pro Stock Champions. Race-tested engineering, not just a shiny cover.

£99 including VAT. Message us or call 01733 248500, or find it on the product page of our site.

25/10/2026

Clutch changes on a GSX1100 usually mean pulling the whole cover. This one doesn't.

The GSX1100 EF/EFE/ET Quick Access Clutch Cover is a two-piece billet design, CNC machined in-house from 6082-T6 aluminium. The outer piece comes off for fast clutch access, so you're not dropping the full cover every time you need to work on the clutch.

Built for set-up work too: there's access for a dial gauge so you can check and adjust precisely, the oil filler sits at the top of the cover for easy top-ups, and there's the option of an oil level window so you can see what's going on inside at a glance.

Direct fit for the Suzuki GSX1100 EF, EFE and ET. Machined at our Yaxley, Peterborough workshop: the same shop that builds the parts behind our 2022 FIM Pro Stock Championship-winning Pro Stock Suzuki. Race-tested engineering, not just a shiny cover.

£425, available now from our product page.

To order or talk fitment, message us here or call 01733 248500.

https://www.psycleworkz.com/product-page/gsx1100-ef-efe-et-quick-access-clutch-cover

23/10/2026

Aluminium Race Bike Lift: roll the bike in, raise it with a battery drill, no more heavy lifting at the front end.

All-aluminium construction, lightweight yet strong, built for Pro Stock, Funny Bike, Pro Mod and Super Street bikes. Designed to be used with rear bike stands, so one person can lift, work and load without the two-person wrestle.

From the makers of our 2022 FIM Pro Stock Championship-winning components, engineered and race-tested at our Yaxley, Peterborough workshop.

£625. Product details here: https://www.psycleworkz.com/product-page/aluminium-race-bike-lift

Questions or orders, message us or call 01733 248500.

22/10/2026

Honda Blackbird CBR1100XX Billet Clutch Cover with Quick Access.

Machined from solid 6082-T6 aluminium billet, this cover is a direct replacement for the OEM item and can be run with a lock-up clutch. The quick-access plate means clutch changes and setup adjustments without dropping the whole cover, a job that used to take far longer.

Race-tested on our own bikes and CNC machined in-house at Yaxley.

£450 including VAT, in stock now: https://www.psycleworkz.com/product-page/honda-blackbird-cbr1100xx-billet-clutch-cover-with-quick-access

Questions about fitment or lock-up options? Drop us a message or call 01733 248500.

21/10/2026

Suzuki GSX1100 EF / EFE / ET Billet Oil Filter Cover: CNC-machined from billet aluminium as a replacement for the OEM cast item.

In stock at £99 including VAT. Available with stud or bolt fitment; please let us know your preference when ordering.

Made in the same workshop as our Pro Stock Suzuki, the 2022 FIM Pro Stock Champions. Precision engineering shaped by hands-on racing experience.

Message us or call 01733 248500 to order or ask a question.

14/10/2026

What really happens during a Pro Stock motorcycle pass? 🏁

Our new blog article, “Inside Pro Stock Motorcycle Racing: The FIM European Championship Explained”, takes you behind the scenes of this demanding form of drag racing.

We explain how the FIM European Championship works across venues including Santa Pod Raceway, Tierp Arena and Hockenheimring, from scrutineering and technical inspection through qualifying, eliminations, the burnout, staging and the launch.

You’ll also get a closer look at the machinery: a naturally aspirated Vance & Hines 1855cc engine, chrome moly chassis, carbon fibre bodywork, six-speed gearbox and no parachute. These bikes can cover the quarter mile in approximately 7.05 seconds at 195 mph.

The article also explores why repeatable performance matters more than chasing a one-off number, and why billet CNC-machined parts are so important on a race bike. Our Pro Stock Suzuki billet clutch cover is machined from 6082 billet aluminium and gives the crew access for clutch switch set-up, allowing adjustments with a dial gauge between runs without removing the rear tyre.

As 2022 FIM Pro Stock Champions, we’re proud to share a practical insight into the racing, preparation and engineering behind the bike.

Read the full article on our blog: https://www.psycleworkz.com/post/inside-pro-stock-motorcycle-racing-the-fim-european-championship-explained

11/10/2026

Give your TL1000 R/S a billet alternative to the original equipment.

CNC-machined in-house at Psycleworkz in Yaxley, Peterborough, from 6082-T6 aluminium. Supplied with the O-ring and filler cap, and also fits the Cagiva Raptor.

It comes from the same workshop as our Pro Stock Suzuki. We’re 2022 FIM Pro Stock Champions and compete in the FIM E Drag Race Championship in the UK, Sweden and Germany. Race-tested, not just race-inspired. What survives a race weekend earns its place on the shelf.

Also available: Honda Blackbird CBR1100XX billet clutch cover with quick access, and Pro Stock Suzuki billet clutch cover with set-up access.

Message us with your bike and fitment requirements, or visit our shop/products page.

09/10/2026

The part of drag racing that nobody films starts now…

With the 2026 FIM E Drag Race Championship season complete, and the Psycleworkz Pro Stock Suzuki closing out the year as Number 1 Qualifier at Santa Pod, the bike is back in the workshop at Yaxley.

Now comes the winter work: strip down, inspect, refresh and rebuild. It is not glamorous, but it is where reliability and performance are earned. Every component is checked carefully, and only what has proved itself through a full season of racing earns its place on the bike for 2027.

This is also where our billet parts face the same standards as everything else we build. Designed, machined and race-tested in the real world, they are made to withstand the demands of Pro Stock racing and make essential maintenance as straightforward as possible.

A huge thank you to everyone who has supported the team throughout 2026. The next season starts in the workshop, and we cannot wait to see what 2027 brings.

If you are a racer or team looking for high-performance billet motorcycle parts or race equipment, get in touch with us.

24/09/2026