Howard Fire Inspections Ltd

29/10/2026

This afternoon the admin team were fluting, along with friends who were tooting. Love an afternoon out of the office, entertaining some lovely residents in a local nursing home.
The power of music 🎶 🎵 🪈

29/10/2026

We are currently booking into December and January 2027. Just a couple of dates left in November.

22/10/2026

🎄🎂 It’s beginning to look and smell a lot like Christmas… well, the admin team thinks so! Today was the day to get the Christmas cake made and start the all-important “oiling” process. It needs time to mature, after all! 😉

🔥 **A little fire safety tip for our clients:** As we head into the colder months, take a moment to check your fire doors. Do they close properly? Are the seals intact? Is anything damaged? A quick check now could make all the difference, particularly in such areas as a kitchen.

🎁 Need a fire risk assessment or fire door inspection? Get in touch!

13/10/2026

🇮🇹 We’ve been a little quiet over the last week…
The team at Howard Fire Inspectors took a well-earned break in Italy! 🇮🇹
We had a look around Pompeii and Herculaneum, but strangely, there weren’t many fire doors left to inspect! 😂
And with Mount Vesuvius looming in the background, we decided it was probably best not to attempt a Fire Risk Assessment either! 🌋🔥
Now it’s back to reality, and we’re back to what we do best:

🚪 Fire Door Inspections
🔥 Fire Risk Assessments
✅ Helping keep buildings, businesses and people safe.

We hope everyone has had a great week, but it’s good to be back!

24/09/2026

🔥 FIRE DOOR SAFETY WEEK 🔥

Are you aware of what you Fire Door Specifications should be?

🚪 FIRE DOOR THICKNESS:
Fire resisting - means designated to resist the passage of flame and smoke, and provide insulation as defined under the prescribed conditions of test appropriate to such condition in accordance with BS 476-22:1987 or BS EN 1634-1:2008.

- 30 Minute fire resisting doors (FD30) - should generally be no less than 44mm in thickness
- 60 Minute fire resisting doors (FD60) - should generally be no less than 54mm in thickness

🚪 SELF-CLOSING DEVICES:
Where self-closing devices are specified - standard overhead units should be used, meeting BS EN 1154 (Building hardware - Controlled door closing devices).
Older closers - may be tested to BS 6459-1 and it is recommended these are replaced. The strength and features of the control must be correct for the size and use of the door fitted.

🚪 HINGES:
Hinges should be tested as part of the overall fire doorset. Where a door assembly requires replacement any replacement hinges should be certified for use in the relevant door assembly configuration (timber/timber, timber/metal, metal/metal etc.). Refer to BS EN 1935:2002 (Building hardware - Single-axis hinges). Where a door is subject to repair as a result of this report, it is recommended the hinges are confirmed to be fitted with intumescent pads as part of the works.

🚪 SEALS:
In addition to intumescent strips, which are standard on most fire doors, cold smoke seals may also be installed/required. In general, all fire doors leading onto means of escape (such as protected corridors, stair-cores and protected lobbies) should be fitted with cold smoke seals. Regular checks should be carried out to ensure cold smoke seals are in good condition and make contact with the door/frame at all points. it may become apparent that doors which are used frequently have damaged seals on a regular basis and should be replaced at the earliest opportunity.

When was your last fire door inspection?

📞 Get in touch with Howard Fire Inspections Ltd to arrange a fire door inspection or a Fire Risk Assessment.

🌐

Howard Fire Inspections Ltd provides professional Fire Risk Assessments and FDIS fire door inspections nationwide, helping you achieve legal compliance and safer buildings.

22/09/2026

🔥🚪 Fire Door Safety Week – CPD Spotlight

This week is Fire Door Safety Week, and Darren will be completing an important CPD session:

🎓 “Fire Door Test with Live Commentary”

Three identical-looking fire doors – but does that mean they will all perform as expected when subjected to a fire test?

The session will cover:

🔹 The differences between BS and EN fire testing
🔹 The failure criteria for fire doors during a test
🔹 Why fire testing is crucial for manufacturers and specifiers
🔹 What can be learned from observing fire doors being tested under real fire conditions

At Howard Fire Inspections Ltd, we believe ongoing professional development is essential to ensuring we stay up to date with the latest knowledge, testing methods and best practice within the fire door industry.

17/09/2026

🔥 Fire Door Safety Week is next week! 🚪

Fire doors play a vital role in protecting lives and property by helping to contain fire and smoke and providing valuable time for people to escape safely.

Fire Door Safety Week is an awareness campaign designed to increase public understanding of the importance of fire doors, their correct use, and the need for regular inspection and maintenance by a certified inspector.

The campaign is owned, managed and run by the British Woodworking Federation (BWF) and is supported by a number of key partners, including the Home Office’s National Fire Safety Campaign, the National Fire Chiefs Council and London Fire Brigade.

Throughout the week, we’ll be sharing information and practical advice on fire door safety, inspections and maintenance.

🚪 A fire door is only effective if it is correctly installed, maintained and kept in good condition.

Follow us throughout Fire Door Safety Week for more information and advice.

12/08/2026

🔥 A little bit about us…

We’re a small husband-and-wife family business, and we’ve just celebrated 30 years of marriage! 💍❤️

Our work is built around three things: safety, fairness, and doing the job properly.

🚪 We carry out fully regulation-compliant Fire Risk Assessments and Fire Door Inspections for all types of premises across the UK. We have extensive experience across historic buildings and the unique challenges they can bring, care homes, schools, hospitals, flats and pubs. 🔥

We’re proud to be a small business where friendly, personal service really matters.

30 years of marriage, countless fire doors inspected, multiple Fire Risk Assessments and we’re still working together!

31/07/2026

As much of the UK experiences another period of hot, dry weather, fire and rescue services are once again responding to an increased number of outdoor fires and wildfires. Recent incidents have highlighted just how quickly fire can spread and the pressure this places on emergency services.

As the person responsible for a building, we must help to ensure buildings are prepared should the worst happen.

✅ Fire doors should close fully and latch correctly and be inspected regularly.
✅ Escape routes should remain clear at all times.
✅ Fire risk assessments should be reviewed regularly, particularly if your building or its occupancy has changed.

Whether you manage a school, residential block, care home, commercial premises or other non-domestic building, now is a good time to check that your fire safety measures are working as intended.

At Howard Fire Inspections Ltd, we provide:
🔥 Independent Fire Door Inspections
🔥 Fire Risk Assessments
🔥 Practical, straightforward advice to help you remain compliant and, most importantly, keep people safe.

If you'd like to discuss your fire safety responsibilities or arrange an inspection, we'd be happy to help.

23/07/2026

🔥 Why choose Howard Fire Inspections Ltd?

Fire doors are a vital part of your building’s fire safety strategy. Having them inspected by a qualified and competent fire door inspector is essential for any responsible person of a building.

Our inspections are carried out by a qualified FDIS Fire Door Inspector, with an understanding of fire door requirements, function, third-party certification and relevant regulations.

The Fire Door Inspection Scheme (FDIS) was the first and remains the only fire door inspection scheme accredited by UKAS to BS EN ISO/IEC 17024:2012 for the certification of persons.

Don't leave fire door safety to chance. 🔥🚪