Lab Expo

Lab Expo Lab Expo is a leading manufacturer of high-quality laboratory and analytical equipment, serving research, healthcare, industrial, and pharmaceutical sectors.

Triple Quadrupole GCMS LE-TQC101 On International Overdose Awareness Day (August 31), Lab Expo recognises the analytical...
08/31/2026

Triple Quadrupole GCMS LE-TQC101
On International Overdose Awareness Day (August 31), Lab Expo recognises the analytical instruments that support toxicology labs in identifying substances quickly and accurately — work that plays a real role in overdose prevention and public health response. The LE-TQC101 offers a mass number range of 5 to 1100 amu with adjustable resolution of 0.4 to 2 amu, a scan rate of up to 20,000 amu/s, and MRM mode sensitivity reaching 1µL of 100 fg/µL OFN at ≥15000:1 — supporting the wide mass range needed for drug and metabolite detection. Its EI ion source (150℃ to 350℃) and inlet heating up to 450℃ support consistent, repeatable results across complex sample matrices. Well suited for forensic toxicology labs, medical examiner's offices, public health agencies, and research institutions studying substance use trends.

[email protected]

Learn more: https://www.labexpo.com/triple-quadrupole-gcms/le-tqc101

Wax Oil Content Tester 52-OTI102 Determine wax content in crude oil and petroleum products with the 52-OTI102 wax oil co...
08/29/2026

Wax Oil Content Tester 52-OTI102
Determine wax content in crude oil and petroleum products with the 52-OTI102 wax oil content tester. It offers a water bath temperature range from room temperature to 90℃ (±5℃), with an adjustable flow rate of 2 to 3 liters per minute for consistent, repeatable measurement. Its glass float-type flow meter allows accurate flow rate readings, while a digital temperature controller supports simple, exact temperature regulation. Built with a refrigeration device and a compact desktop structure, it can test two samples simultaneously — a practical fit for petroleum labs, quality control facilities, and industrial testing sites.
[email protected]

Learn more: https://www.labexpo.com/wax-oil-content-tester/52-oti102

Cryostat Microtome 23-LCM100 Achieve consistent, high-quality tissue sectioning with the 23-LCM100 cryostat microtome. ...
08/28/2026

Cryostat Microtome 23-LCM100
Achieve consistent, high-quality tissue sectioning with the 23-LCM100 cryostat microtome. This system integrates freezing and sectioning technology, producing slices from 1µm to 100µm with a freezing chamber temperature range of -10℃ to -40℃ and chuck holder minimum temperature of -50℃. Its Peltier stage regulates temperature with 0.5℃ accuracy, while dual compressors deliver quiet, stable cooling at 40 dB. Featuring a handwheel lock system, anti-fog glass window, and a cool plate holding up to 28 specimen chunks with a four-color chuck system, it's well suited for histology labs, clinical diagnostics, and research facilities requiring reliable frozen sectioning.

[email protected]

Learn more: https://www.labexpo.com/cryostat-microtome/23-lcm100

Ozone Test Chamber 24-OTC104 Assess material resistance to ozone exposure with the 24-OTC104 ozone test chamber. It offe...
08/27/2026

Ozone Test Chamber 24-OTC104
Assess material resistance to ozone exposure with the 24-OTC104 ozone test chamber. It offers a maximum ozone concentration of 120 g O₃/m³ (1–1000 PPHM), a temperature range of 0℃ to 100℃ with ±0.5℃ fluctuation, and a rapid cooling rate from ambient to 0℃ within 20 minutes. Its 900 mm diameter sample holder rotates at 0 to 10 r/min, accommodating large test specimens, while the corrosion-resistant stainless steel chamber and UV detector support real-time ozone monitoring. With a PID programmable controller featuring LED touchscreen display and PLC-HMI-SOC integration, it's well suited for rubber, plastics, packaging, medical device, and automotive testing under standardized environmental stress conditions.

[email protected]

Learn more: https://www.labexpo.com/ozone-test-chamber/24-otc104

Cryostat Microtome 23-LCM100 As Psoriasis Action Month raises awareness around skin health and dermatological research, ...
08/27/2026

Cryostat Microtome 23-LCM100
As Psoriasis Action Month raises awareness around skin health and dermatological research, Lab Expo highlights how histopathology equipment supports accurate skin biopsy analysis. The 23-LCM100 combines freezing and sectioning technology to create tissue slices from 1µm to 100µm, with a freezing chamber temperature range of -10℃ to -40℃ and a chuck holder minimum temperature of -50℃. Its Peltier stage regulates temperature with 0.5℃ accuracy, while dual compressors keep operation quiet at 40 dB for extended use. Featuring a handwheel lock system, anti-fog glass window, and a cool plate holding up to 28 specimen chunks, it's built for histology labs, clinical diagnostics, and dermatopathology research supporting skin condition studies.

[email protected]

Learn more: https://www.labexpo.com/cryostat-microtome/23-lcm100

Heating Circulating Bath 22-HCB100 Maintain stable, controlled heating conditions with the 22-HCB100 heating circulating...
08/26/2026

Heating Circulating Bath 22-HCB100
Maintain stable, controlled heating conditions with the 22-HCB100 heating circulating bath. It offers a 22 L chamber volume, temperature range of RT+5℃ to 70℃, and temperature stability of ±0.3℃ for consistent results. Its digital temperature controller pairs with an electromagnetic pump circulation system for efficient fluid movement, while a programmable timer of 1 to 999 minutes supports flexible protocols. Built with a corrosion-resistant stainless steel chamber, a low-liquid safety alarm, and nonslip rubber feet for stability, it's well suited for sample incubation, reagent preparation, microbiological testing, and cell research.


[email protected]

Learn more: https://www.labexpo.com/heating-circulating-bath/22-hcb100

Dental Autoclave LE-DAC102 Achieve consistent, efficient sterilization of dental instruments with the LE-DAC102. Featuri...
08/25/2026

Dental Autoclave LE-DAC102
Achieve consistent, efficient sterilization of dental instruments with the LE-DAC102. Featuring a 24 L capacity, adjustable temperature range of 105℃ to 134℃, and rapid cycle time of 4 to 6 minutes, it's built for standard dental sterilization loads. Its automated microcomputer control system maintains temperature accuracy of ±1℃, while integrated water shortage protection, overheat prevention, and overpressure safeguards keep operation safe. With automatic power-off at cycle completion and a compact, lightweight design for easy repositioning, it's well suited for dental clinics, hospitals, laboratories, and research facilities.

[email protected]

Learn more: https://www.labexpo.com/dental-autoclave/le-dac102

Horizontal Autoclave 26-HAC402 Process massive instrument loads efficiently with the 26-HAC402 horizontal autoclave. Wi...
08/24/2026

Horizontal Autoclave 26-HAC402
Process massive instrument loads efficiently with the 26-HAC402 horizontal autoclave. With a 600 L capacity and double door, motorized sliding design, it delivers an effective sterilization temperature of 139℃ at 0.25 MPa, with steam pressure and consumption of 0.4–0.6 MPa / 30 kg. Its digital LCD interface offers real-time monitoring of operating status and parameters, while the interlocked door lock prevents opening until chamber pressure drops to 0.027 MPa. Automatic power cut-off with alarm indication for low water conditions adds an extra layer of protection, making it well suited for culture media, surgical instrument, dressing, and glass component sterilization in high-capacity laboratory settings.

[email protected]

Learn more: https://www.labexpo.com/horizontal-autoclave/26-hac402

Benchtop Ion Meter 25-BIM112 Get accurate iodide ion measurements across a range of water samples with the 25-BIM112 ben...
08/21/2026

Benchtop Ion Meter 25-BIM112
Get accurate iodide ion measurements across a range of water samples with the 25-BIM112 benchtop ion meter. It offers a measurement range of 0.06 to 127,000 ppm with accuracy of ±1% F.S., resolution down to 0.001, and flexible 2 to 5-point calibration for varied testing needs. Its integrated stability indicator supports consistent readings, while temperature measurement from 0℃ to 105℃ with automatic or manual compensation adds precision. With a clear 130 × 110 mm LCD display, USB communication interface, and storage for up to 500 data sets, it's well suited for drinking water verification, wastewater monitoring, and laboratory sample analysis.

[email protected]

Learn more: https://www.labexpo.com/benchtop-ion-meter/25-bim112

Gas Chromatography 30-GCG100 Achieve accurate compound separation and detection with the 30-GCG100 gas chromatography sy...
08/20/2026

Gas Chromatography 30-GCG100
Achieve accurate compound separation and detection with the 30-GCG100 gas chromatography system. It operates across a temperature range of 5℃ to 450℃ with a maximum heating rate of 120℃/min, 7-step temperature programming, and setting precision of 1℃. Compatible with capillary and packed columns, plus packed, split/splitless, and cool on-column injectors, it supports low detection limits across trace compound identification. Choose from selectable FID, TCD, FPD, ECD, NPD, and PDHID detectors, each with individual temperature control, LCD display, and self-diagnosis capability. Well suited for petrochemical analysis, gas industry testing, pharmaceutical quality control, food and chemical analysis, and oil refining evaluation.

[email protected]

Learn more: https://www.labexpo.com/gas-chromatography/30-gcg100

Address

123 W 1st
Casper, WY
82601

Website

Alerts

Be the first to know and let us send you an email when Lab Expo posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category