What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

Jobsons Tools

Name: Jobsons Tools
Address: Canvey, Canvey Island, SS8, GB
Telephone: +441268510174
Price range: $

Call Directions Website Contact the business

Tool repairs & reviews 🧰
⚡ 🤝 🫆�🛠️ No Fix, No Fee
📩 DM “Reapir” to Book

31/10/2026

🔧 THE RIGHT TOOL FOR THE JOB! 👀

An internal bearing puller… not something we reach for every single day, but when you need one, you REALLY need one! 💪

Some jobs are straightforward. Others? Without the right tool, you’re going nowhere. 😂

Having the right kit makes all the difference, especially when you’re trying to get a stubborn bearing out without making a bigger problem.

👇 What’s that one tool in your toolbox you don’t use often, but couldn’t do without?

30/10/2026

🎨🔥 TWO GRACO SPRAYERS… WHICH ONE ARE YOU CHOOSING? 👀

We’ve got two cracking bits of kit here at The Tool Medic, but they’re built with slightly different jobs in mind!

🔵 GRACO ULTRAMAX CORDLESS
💪 Up to 2,000 PSI
🔋 Cordless, powered by DEWALT 18V batteries
🎯 SmartControl / ProControl II for adjustable spray control
🛠️ Triax triple-piston pump with ProConnect replacement
🎨 Sprays water-based, solvent-based and flammable architectural coatings, when used as specified by Graco.

⚫ GRACO ULTRA QUICKSHOT II
⚡ Up to 2,000 PSI (138 bar)
🔋 Cordless and lightweight
🎯 Instant-response electric spray gun, designed to virtually eliminate tip spits
🧼 Quick Flush cleaning mode — up to 2x faster cleaning using roughly half the water
🛠️ ProConnect pump and gun cartridge for easier servicing.

Both are proper bits of kit, but the QuickShot II is aimed at smaller jobs and finishing work, while the UltraMAX offers versatility for a wider range of coatings and small projects.

👇 WHICH ONE ARE YOU CHOOSING?
🔵 ULTRAMAX or ⚫ QUICKSHOT II?

Let us know in the comments! 👇

29/10/2026

🔧 MAKITA COMBI DRILL – BACK FROM THE DEAD! 💪

This Makita combi drill needed a bit more than just a quick once-over! 👀

We’ve fitted:
🔩 New motor
⚡ New carbon brushes
🛠️ New brush holder

All fitted, put back together and tested. Another tool brought back to life and ready to get back on site earning its keep! 🔥

Got a Makita or another power tool that’s given up on you?

📩 Get in touch with The Tool Medic and get your repair booked in.

🔧 Repairs & servicing
✅ No fix, no fee

29/10/2026

🔧🔥 WHY DID WE WANT TO LEARN TO WELD? BECAUSE WHY NOT! 😂

One more skill under our belt and another thing we can do here at The Tool Medic! 💪

We’re always looking to learn, improve and push ourselves. Being able to weld opens up even more opportunities in the workshop, and this is just the beginning.

A massive shout-out to for sponsoring us on this journey and giving us the kit and support to get stuck in. We genuinely appreciate it! ❤️

We’re learning as we go, making mistakes, improving every time and having a laugh along the way.

ALOT more to come… 👀🔥

28/10/2026

🔧🔥 PASLODE 2ND FIX NAILER — TIME FOR A SERVICE!

Your nail gun works hard on site, but when was the last time it had a proper service? 👀

At The Tool Medic, we strip them down, give them a deep clean, check over the important components, replace worn parts where needed and get them back together, ready for work. 💪

✅ Full strip down & clean
✅ Inspection of key components
✅ Seals and wear parts checked
✅ Reassembled & tested

Keep your nailer firing like it should and help prevent those annoying breakdowns on site!

📍 The Tool Medic – Canvey Island, Essex
🔧 Paslode servicing & repairs
💷 Services from £70 (depending on the service required)
📩 Drop us a message to get booked in!

Don’t wait until it lets you down on the job!

28/10/2026

🔧🔥 DRILL IT. TAP IT. DEBURR IT. ALL WITH ONE TOOL!

Ever cross-threaded a hole or needed to cut a fresh thread? 👀

Today we’re looking at the ULTIMATECUT Combi Machine Tap Set and this is a clever bit of kit!

💥 3 jobs in 1:
🔩 Drilling
🧵 Cutting metric threads
⚙️ Deburring

✅ 7-piece set
✅ M3, M4, M5, M6, M8 & M10
✅ HSS with RUnaTEC coating
✅ FLOWSTEP tip
✅ ¼” hex shank with magnetic bit holder

We recently used the M5 to sort a cross-threaded M5 thread, and it worked perfectly! 👌

Less messing about changing tools and a handy bit of kit to keep in the workshop or van.

👇 Would you keep a set of these in your toolbox, or stick with traditional taps?

27/10/2026

🔧 ANOTHER COMMON HILTI TE3000-AVR FAULT! 👀

The trigger not springing back? It could be that little sponge at the back giving up! 🤦‍♂️

This one can catch people out. The sponge deteriorates, stops doing its job, and suddenly your trigger isn’t returning properly.

And the annoying bit? You’ve got to strip the tool down just to replace one little sponge! 😂

🔧 Strip it down
🧽 Replace the failed sponge
🛠️ Get everything back together
✅ Check the trigger operation

It’s always the little things!

Got a Hilti playing up? Red light on? Trigger problems? Not performing like it should?

📩 Get in touch with The Tool Medic and get your tools booked in.

📞 07447 444311
📍 Canvey Island, Essex
🔩 Repairs, servicing & Hilti red light resets.

27/10/2026

🧰 A TOOL FITTER’S DREAM SETUP! 🔥

Now that’s what you call a boot full of kit! 👀🔧

Knipex, Wera, Milwaukee, DeWalt and plenty more — all the essentials ready to get stuck into the next job! 💪

A good set of tools makes all the difference, but the real question is… 👇

If you could only keep 5 tools from this lot, what are you keeping? 🤔👇

26/10/2026

🔧 EVEN HAND TOOLS NEED A SERVICE! 👀

It’s not just power tools that need a bit of TLC!

Today we’re stripping down this ratchet, cleaning out all the old grease, giving it a proper clean and applying fresh grease before putting it all back together. 💪

Over time, old grease and dirt build up, so a little maintenance can go a long way in keeping your tools working as they should.

🧼 Strip it down
🛠️ Clean out the old grease
🧴 Fresh grease
✨ Full clean and back together

Look after your tools and they’ll look after you! 👊

Be honest… when was the last time you serviced your ratchet? 😂👇

26/10/2026

💥🔧 WILL THE ONEVAN IMPACT WRENCH SHIFT THEM?

Today we’re putting the cordless impact wrench to the test on the van, taking the wheel nuts off and showing you what this thing can do! 👀💪

With up to 1,800Nm of claimed torque, this thing promises some serious grunt! But there’s only one way to find out… get it on the wheel nuts! 🔥

🔩 ½” impact wrench
⚡ Brushless motor
💪 Up to 1,800Nm claimed torque
🔋 Cordless convenience

Would you trust this on your van, or are you sticking with your usual impact? 👇

⚠️ Remember, removing wheel nuts is one thing. Always tighten wheel nuts to your vehicle manufacturer’s specified torque using a suitable calibrated torque wrench. Don’t use the impact’s torque claim as a tightening setting.

Address

Canvey
Canvey Island
SS8

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Telephone

+441268510174

Website

http://www.jobsonstools.co.uk/

Alerts

Be the first to know and let us send you an email when Jobsons Tools posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.