15/10/2026
Thank you, Richard—we’re pleased to see the interest in the launch.
You’re right to ask what we mean by a “suitable circuit”.
For UKSOL Plug-In Solar Pro, the minimum requirements are:
- A socket circuit with suitable overcurrent and residual current protection—for example, an RCBO, or circuit breakers with an appropriate upstream RCD. An MCB alone does not provide RCD protection.
- Wiring, earthing and a socket that are in good condition and suitable for the connection.
- A socket circuit that does not also supply lighting or fixed equipment, such as a boiler or cooker.
- Direct connection using the supplied plug and cable, without extension leads, adaptors or modifications.
- Compliance with the kit’s installation instructions and the current limit of one plug-in solar device per household.
You can carry out the straightforward consumer checks described in the instructions:
read the visible consumer-unit labels, identify the socket circuit and operate the RCD or RCBO test button as instructed. You should not remove covers or undertake electrical testing yourself. These checks do not certify the wiring or earthing.
An electrician’s assessment is not a blanket requirement for every installation.** However, seek advice from a qualified electrician before connecting if the installation is old, has not been inspected for some time, has older rewireable fuses, lacks identifiable suitable RCD protection, or you are unsure about the circuit, socket or wiring condition.
Our instructions also recommend professional assessment where the combined panel rating exceeds *960 W*. This refers to panel power, not the inverter’s AC output.
On RCD type specifically, Electrical Safety First recommends a minimum Type A bidirectional RCD as a precautionary measure. Neither the government’s Interim Product Specification nor the Energy Saving Trust consumer checklist sets out a blanket requirement to upgrade to Type A protection before installing compliant plug-in solar.
This does not mean every existing installation is suitable. Where suitability is uncertain, a qualified electrician should assess the particular circuit and determine whether any changes are necessary.
Further guidance is available in the [Energy Saving Trust consumer checklist developed with DESNZ](https://energysavingtrust.org.uk/plug-in-solar-panel-checklist/).