FES - EX Limited

FES - EX Limited Established 16 years ago by our Managing Director, F.E.S. F.E.S. Want to know more? Visit our website; www.fes-ex.com.

Our team of experienced, competent Electrical/Mechanical personnel have proven skills within the areas of Design, Process safety, Health & Safety, Operations, Maintenance, Inspections and Installations within hazardous and non hazardous areas. (EX) is a leading provider of a range of E, I & M services for all industries across both hazardous and non- hazardous environments. We assist clients in a variety of ways; from Design, Process safety, Health and Safety right through to Operations, Maintenance, Installation, Inspection, Rectification and Testing or E, I & M assets. (EX) has vast experience of providing hazardous areas compliance covering all aspects of ATEX, DSEAR & Global requirements. We are proud of our capabilities and offer a flexible "hands-on" approach to all clients, that allows us to tailor our services based on the individual needs; whilst maintaining a zero-accident health and safety record. We continuously invest in ensuring our systems are efficient, secure & up to date, as such we hold many accreditation's such as; ISO 9001, ISO 14001 and ISO 45001, Cyber Essentials, NICEIC Electrical Contractor and NICEIC Hazardous Areas accredited along with being Achilles FPAL & UVDB audited.

The world's largest wind monopile manufacturing facility required hazardous-area electrical installation delivered insi...
06/09/2026

The world's largest wind monopile manufacturing facility required hazardous-area electrical installation delivered inside a live, multi-contractor construction programme.

Tight sequencing, congested access, a coating and paint-spray booth environment with zero margin for error.

We supplied and installed power outlet points, distribution boards, transformers and cable containment, then tested and certified the lot, with dedicated project engineering and supervision throughout.

The result: fully certified electrical services across all coating booth areas, and a facility ready for commissioning.

Read the full case study here: https://www.fes-ex.com/case-studies/ses-engineering-services/

Three days lost. That's what an isolation issue on site could have cost.Instead, our engineer re-organised the labour on...
02/09/2026

Three days lost. That's what an isolation issue on site could have cost.

Instead, our engineer re-organised the labour on the spot and kept the programme moving.
Here's how Adam Hill described the team's work:

"The performance of the team has been faultless, they are all site familiar. Your engineer re-organised the labour last minute due to an isolation issue here, which would have prevented FES working for three days.

Your site team were audited a number of times by site, and I received positive feedback about those interactions.

I am a satisfied customer, thank you."

This is what a multi-year framework is built on: a team that knows the site, reacts fast, and gives the client one less thing to worry about.

Talk to us about hazardous area compliance 👉 https://www.fes-ex.com/contact/

Most contractors can tell you what they'll do on your project. Fewer can show you the structure behind it.At F.E.S. (EX)...
21/08/2026

Most contractors can tell you what they'll do on your project.
Fewer can show you the structure behind it.

At F.E.S. (EX), that structure has been 21 years in the making: design engineers, project managers, dedicated QA/QC, and CompEx-qualified inspectors, all working from the same processes on every job, regardless of size.

It's why we can run a detailed ATEX inspection at one site and a multi-contractor construction project at another, in the same week, without either one being under-resourced.
DSEAR and ATEX compliance is a long-term responsibility.

It takes a team built for the long term to carry it properly.
Curious what that structure looks like on your project?

Get in touch and we'll talk it through 👉 https://www.fes-ex.com/contact/

From apprentice to qualified E&I Inspector/Installer, that's the kind of journey we're proud to support.This month marks...
17/08/2026

From apprentice to qualified E&I Inspector/Installer, that's the kind of journey we're proud to support.

This month marks 6 years since Charlie joined F.E.S. (EX) as an Electrical Apprentice.

Congratulations Charlie, here's to the next chapter ⚡

As teams return from summer breaks and Q4 planning gets underway, it's a good moment to run a proactive hazardous area c...
15/08/2026

As teams return from summer breaks and Q4 planning gets underway, it's a good moment to run a proactive hazardous area check:

✅ Has your zoning been reviewed against recent process changes?
✅ Have suppression and venting systems been tested recently?
✅ Are training logs and safety briefings current?
✅ Is your documentation audit-ready?

A safe end to the year starts with a proactive end to the summer.

Need a hand working through the list? Let's chat 👉 https://www.fes-ex.com/contact/

We're pleased to share two contract wins this month.Our Hull branch has been appointed to an additional long-term ATEX S...
11/08/2026

We're pleased to share two contract wins this month.
Our Hull branch has been appointed to an additional long-term ATEX Support project at Saltend Chemicals Park.

Alongside this, we have secured a further 3-year contract with a longstanding client in the Easington area, carrying out ATEX inspections on electrical and non-electrical items of equipment.

Both appointments reflect the same principle: hazardous area compliance is a long-term responsibility, not a one-off job.
Consistency, technical rigour, and up-to-date documentation are what earn a contractor repeat business from sites like these.

We're proud of what these wins represent for the team, and for F.E.S. (EX) more broadly.
Get in touch with our expert team today 👉 https://www.fes-ex.com/contact/

When did you last check whether your "compliant" equipment is still actually compliant?Most non-conformances we find on ...
10/08/2026

When did you last check whether your "compliant" equipment is still actually compliant?
Most non-conformances we find on inspection weren't caused by bad installation.

They were caused by drift.
Glands loosen, enclosures corrode, documentation falls out of step.
None of it happens overnight, which is exactly why it gets missed.

On every ATEX inspection project (unless a client has their own system) we use ExTrace, our own asset management platform, capturing data and photos against the relevant BS EN IEC 60079 schedule at the point of inspection.
No re-keying, no lag between finding and recording.

And where we find a non-conformance, our field engineers can rectify it there and then, rather than handing you a report and a second contractor to book in.

If it's been a while since your last inspection, get in touch and we'll help you find out where you stand.
👉 https://www.fes-ex.com/contact/

F.E.S. (EX) started in Oil & Gas, working across major COMAH sites. That background still shapes how we work today, even...
05/08/2026

F.E.S. (EX) started in Oil & Gas, working across major COMAH sites.
That background still shapes how we work today, even though the sectors we serve have grown well beyond it.

Chemicals, defence, pharmaceuticals, food & drink, renewables, water and wastewater, are just a few examples of where we deliver hazardous area compliance, because the underlying discipline doesn't change.
Classify the risk properly, install and inspect to the right standard, keep the documentation current.

21 years of doing that across different industries is what lets us walk onto a new site and already know what we're looking for.
Get in touch with our expert team today 👉 https://www.fes-ex.com/contact/

Compliance isn't something you achieve once. It's something you maintain - year after year.We've just passed our NICEIC ...
30/07/2026

Compliance isn't something you achieve once. It's something you maintain - year after year.

We've just passed our NICEIC Approved Contractor audit for the 12th consecutive year.
Alongside that, we've successfully completed our Achilles UVDB full audit and onboarded onto the ISNetworld (ISN) platform at the direct request of clients.

For businesses operating in regulated, high-hazard environments, contractor accreditation is part of your risk management.
A 12-year NICEIC record and a clean Achilles audit aren't just credentials - they're evidence of how we operate.

DSEAR applies to any business that stores, handles or produces flammable, explosive or oxidising substances. That covers...
27/07/2026

DSEAR applies to any business that stores, handles or produces flammable, explosive or oxidising substances.
That covers a lot of sites.

The question we get most often isn't "do we need one" - it's "how do we know when ours needs updating?"

The honest answer: if your process has changed, your site layout has changed, or it's simply been a while, it probably does.

A good DSEAR assessment doesn't just tell you what the regulation requires. It tells you where your real risks are and what to do about them.

Our Process Safety team can help - get in touch for a straightforward conversation.

🔗 https://www.fes-ex.com/contact/

Address

Grimsby
DN364

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+441472598987

Website

Alerts

Be the first to know and let us send you an email when FES - EX Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category