Utica Sign and Graphics

05/22/2026

05/20/2026

Finished with the install but there was no power at the box, so Don may have to get an electrician to trace the line.

04/30/2026

Installed the cage I welded together
and installed in the ground for the Boilermaker 1 Mile Marker that was taken out by a vehicle.

We were able to pull the bent channel posts out, as they were not in concrete.( we didnt do these signs).

So we dug out the hole and went down close to 36" deep, filled with 180
lbs. of concrete mix, then backfilled with the soil from the hole.

Should be able to reinstall the sign tomorrow.

I will do a live post explaining what I did
to the existing sign.

04/16/2026

After seeing the original pic, noticed the outer LED band in the 0 was not working. Quick check and tightened the wire nut. Back online! Forgot to mention the faces are wrapped with brushed aluminum car wrap vinyl.

04/16/2026

Just wrapped up the installation at Walmart Distribution Center #6096 in Johnstown.

Laminated & routed PVC with LED'S
front and back on NY State and back for the 6096.

Let us do one for you!

03/27/2026

As promised, here is a sampling of the various items that we installed yesterday & today, including aluminum pin mount logos, various vinyl applications, picture frames, full wall wraps & vinyl ceiling borders, etc.

Keep us in mind for profession graphics and installations!